Temperature sensor type TP23, Construction type 2, plug-in sensor for protection tube with straight cable outlet Measuring element/Measuring principle Application range Temperature sensors of the TP23 series are especially designed for use in Shipbuilding industry, machinery and equipment for temperature measurement in traction motors, gear boxes, wheelset bearings and compressor- and air conditioning systems. Measuring principle Temperature sensors of the TP23 series operate according to the measurement principle / with the measuring element Pt100. Functioning of platinum measuring elements With this measuring principle the temperature-sensitive resistance value of the measuring element is acquired. For platinum measuring elements the electrical resistance increases with increasing temperature and decreases with decreasing temperature (temperature linear). Advantages of platinum measuring elements are: • accurate and reproducible thermoelectric characteristics • nearly linear temperature characteristic • easy to replace (no calibration necessary, corresponding to international standards, e. g. IEC 751 / DIN EN 60751) • measurement is faster and more precise than with thermocouples Specific features • Compact, robust design • Easy installation via protection tube • Connection with fixed cable, straight cable outlet • Temperature linear transmission behaviour • As 2-wire or 4-wire type available • Suitable measuring transducers, limit value switches and analogue indicators available • Sensor as Pt100 or as NTC available Datasheet DB-TP23-EN | V01.03 | 06/06/2016 | Valid from product revision Rev.- | www.noris-group.com | [email protected]

| Dimensions, connections and drawings NORIS Automation GmbH Dimensions, connections and drawings Dimensions temperature sensor A Explanation to the illustration A: Length 2300 mm B: Length 62 mm C: Length 48 mm D: Length 10 mm E: Teflon cable with steel wire mesh, 2 x 0.752 Protection tubes are used for temperature measurement in fluids. If protection tubes are used, temperature sensors can be replaced during operation. Dimensions protection tube MX1 (brass) B Explanation to the illustration A: Length 16 mm B: Length 16 mm C: Length 55 mm D: Diameter see next table E: Screw connection F: Sealing...

| Technical Data NORIS Automation GmbH DB-TP23 NORIS Automation GmbH | Muggenhofer Str. 95 | 90429 Nuremberg | Germany | Tel: +49 911 3201-220 | Fax: +49 911 3201-150 | [email protected] | www.noris-group.com Errors and omissions excepted

| Type code NORIS Automation GmbH Preferred types Features marked with a ★ symbol at the end of the line are preferred features. If you select a preferred feature for each placeholder, the device is specified as preferred type. Preferred types are available quickly from stock. Other types will be delivered according to scheduled appointments. Special types If our standard types do not correspond with your expectation, we are pleased to develop a special solution together with you. DB-TP23 NORIS Automation GmbH | Muggenhofer Str. 95 | 90429 Nuremberg | Germany | Tel: +49 911 3201-220 | Fax: +49...