NORIS GE14-.. Cost-effective tachogenerator Straightforward application Suitable for severe conditions of duty NORIS tachogenerators are maintenance-free Compact design A.C. voltage output Meets C€ requirements Noise-immune signal transmission No radio interference Direct or indirect drive possible Protection class: casing IP65, Drive end: IP54 Choice of electrical terminations Choice of mechanical connections for speed sensing Flanges and brackets available for mounting Suitable evaluation devices available Tachogenerators of series GE.. Tachogenerators Germanischer Lloyd NORIS A.C. tachogenerators are maintenance-free speed-measuring devices using permanent-magnet excitation. They are designed to provide an A.C. voltage signal that is proportional to a speed of their drive shaft. It is possible to use either voltage or frequency as the measured variable. Tachogenerators are used where a direct supply is desired for indicating instruments, monitoring or processing devices. Drive is either direct from the take-off shaft by means of couplings or indirectly via belt-and-pulley or friction wheel arrangements. Tacho-generators are working without operating voltage. General notes on Type GE14-.. Method of operating of GE14-.. tachogenerator The drive shaft rotates a permanent magnet in a stationary conductor and induces a voltage in the latter whose amount and frequency are proportional to the speed of the drive shaft. The GE14-.. is of 12 the pole type having 6 pairs of poles so that the frequency of the alternating voltage is 1/10 of the input speed. Details of the GE14-.. tachogenerator • There are four standard variants available of this series: • GE14-09 with connection 8 to DIN 5377 and quick-connect terminal • GE14-091 with connection 8 to DIN 5377 and connecting cable • GE14-10 with connection 2 to DIN 5377 and quick-connect terminal • GE14-12 with skewing shaft with lug and quick-connect terminal • Output is a sinusoidal A.C. voltage • Long life through sturdy suspension of drive shaft (GE-14-10) • Direct drive possible via flexible couplings (GE14-10) • Indirect drive possible via V-belt pulleys or friction wheels (GE14-10 • Wheels or pulleys can be mounted directly on the shaft (GE14-10) Voltage characteristic The voltage characteristic shows the output voltage plotted against speed at a load of 1 mA: Load Characteristic The load characteristic shows the drop in output voltage in % at varying loads and at different speeds: Voltage drop

Other Data Series GE14-.. Termination Quick-connect terminals 6,3 x 0,8 to DIN 46244, with cable entry PG11 GE14-091 with connection 8 to DIN 5377 Termination Cable TEGL 0 P2 x 0,75, approx. 3,5 m GE14-10 with connection 2 to DIN 5377 Accessory to tachogenerators Item additional by inquiry additional information for drive and mounting see drawing Termination Quick-connect terminals 6,3 x 0,8 to DIN 46244, with cable entry PG11 GE14-12 with skewing shaft and lug '6081. ,,8/Z Termination Quick-connect terminals 6,3 x 0,8 to DIN 46244, with cable entry PG11 Type key / variants Device code GE Design...