weatherfast wood primer

Product catalog summary

Description: Weatherfast Grey Primer is a heavy-bodied, fast-drying, and easy-sanding grey primer suitable for most bare surfaces except those subject to continuous immersion. It is compatible with all air-dried paint systems.

Properties: The primer is mid-grey in color, has a flat finish, and covers 10-12 square meters per liter. It is touch dry in 1-2 hours at 50% relative humidity and can be recoated after 16 hours. The product has a flash point of 32°C and a weight of 1.4 kg per liter with 71% volume solids.

Application: Before application, stir the contents and ensure the surface is dry and free from contaminants. It can be applied by brush or short nap roller, allowing 24 hours to dry. For spraying, thin with up to 33 1/3% Weatherfast Spraying Thinners, and note that longer drying times may be required.

Preparation: For new timber, sand and clean with methylated spirits. For other substrates, refer to NORGLASS Information Guides.

Transportation: Classified as dangerous goods, Class 3.2 flammable liquid, with Hazchem code 3[Y] P.G. III. Available in sizes of 4 liters, 1 liter, 500 ml, and 250 ml.

Precautions: Ensure adequate ventilation, avoid smoking, and wear appropriate protective equipment when spraying. Do not use on continuously immersed areas or under 2-pack paints.

First Aid: If swallowed, do not induce vomiting; provide water or milk and seek medical help. For eye contact, flush with water for 15 minutes and seek medical attention. For skin contact, wash with soap and water. If inhaled, move to fresh air and rest.

Disclaimer: NORGLASS provides advice and information in good faith but without liability or responsibility.

Catalog excerpts

Sep 2009 PRODUCT DATA SHEET NORGLASS LABORATORIES PTY.LTD. A.B.N. 92 001 807 245 P.O. Box 312, Neutral Bay NSW 2089 Australia 59 Moxon Road, Punchbowl NSW Ph: 61 2 9708 2200 Fax: 61 2 9796 3069 Email: [email protected] www.norglass.com.au WEATHERFAST GREY PRIMER DESCRIPTION: A heavy-bodied grey Primer with fast drying and easy sanding properties. USES: For use on most bare surfaces other than those of continuous immersion. Suitable for all air dried paint systems. PROPERTIES (at 20°C) COLOUR: Mid Grey TOXICITY: See Precautions FINISH: Flat COVERAGE: 10-12sq.metres/litre DRYING TIME: Touch dry 1-2 hours at 50% relative humidity RECOATING: After 16 hours POT LIFE: N/A MIXING RATIO: N/A THINNING: Not recommended for brush or roller use. Spraying – Thin with up to 33 1/3% of Weatherfast Spraying Thinners. WEIGHT/LITRE: 1.4kg VOLUME SOLIDS: 71% FLASH POINT: 32°C CLEAN UP: Weatherfast Brushing Thinners U.N. NUMBER: 1263

Open the catalog to page 1

Page 2 – Weatherfast Grey Primer PREPARATION: New Timber – Sand and remove dust from the grain with clean cloths soaked in methylated spirits and allow to dry. Other substrates – Refer to appropriate NORGLASS INFORMATION GUIDES for advice. APPLICATION: Stir contents before use. Ensure that the surface is dry and free from contaminants. Apply by brush and short nap roller and allow 24 hours to dry. If spraying, wet on wet coats are possible but longer drying time may be required for all the solvent evaporation to take place. TRANSPORTATION: Dangerous goods, Class 3.2 Flammable liquid Hazchem 3[Y]...

Open the catalog to page 2

All Norglass catalogs and brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list