Catalogs >
Norglass >
weatherfast undercoat

weatherfast undercoat
2Pages

Catalog excerpts

Sep 2009 PRODUCT DATA SHEET NORGLASS LABORATORIES PTY.LTD. A.B.N. 92 001 807 245 P.O. Box 312, Neutral Bay NSW 2089 Australia 59 Moxon Road, Punchbowl NSW Ph: 61 2 9708 2200 Fax: 61 2 9796 3069 Email: norglass@bigpond.net.au www.norglass.com.au WEATHERFAST UNDERCOAT DESCRIPTION: A heavy bodied white undercoat with fast drying and easy sanding properties. USES: For use on most primed surfaces. Not suitable for areas of continuous immersion. Suitable for all air dried paint systems. PROPERTIES (at 20°C) COLOUR: White TOXICITY: See precautions FINISH: Flat COVERAGE: 10-12sq.metres/litre DRYING TIME: Touch dry 1-2 hours at 50% relative humidity RECOATING: After 16 hours POT LIFE: N/A MIXING RATIO: N/A THINNING: Not recommended for brush or roller use. Spraying – Thin with up to 33 1/3% Weatherfast spraying thinners. WEIGHT/LITRE: 1.4kg VOLUME SOLIDS: 68% FLASH POINT: 32°C CLEAN UP: Weatherfast Brushing Thinners U.N. NUMBER: 1263

Open the catalog to page 1

Page 2 – Weatherfast U/Coat PREPARATION: New Timber – Apply 1 or more coats of Weatherfast grey Primer and allow to dry thoroughly. Sand and remove dust from the grain with clean cloths soaked in methylated spirits and allow to dry. Other substrates – Refer to appropriate NORGLASS INFORMATION GUIDES for advice. APPLICATION: Stir contents before use. Ensure that the surface is dry and free from contaminants. Apply by brush and short nap roller and allow 24 hours to dry. If spraying, wet on wet coats are possible but longer drying time will be required for all the solvent evaporation to take...

Open the catalog to page 2

weatherfast undercoat 2Pages

Catalog excerpts

All Norglass catalogs and brochures

weatherfast undercoat
2Pages