PRODUCT DATA SHEET NORGLASS LABORATORIES PTY.LTD. A.B.N. 92 001 807 245 P.O. Box 312, Neutral Bay. NSW 2089 Australia 59 Moxon Road, Punchbowl NSW Ph: 61 2 9708 2200 Fax: 61 2 9796 3069 Email: [email protected] www.norglass.com.au WEATHERFAST POLY CLEAR DESCRIPTION: A one pack Clear Finish in either gloss or satin with excellent durability and abrasion resistance. Contains a high level of ultra violet screening agents making it suitable for exterior and interior use. USES: Ideal for floors, furniture and all marine applications especially in heavy duty areas. Has very good water resistance, although not recommended for areas of constant immersion. PROPERTIES (at 20°C) COLOUR: Pale amber TOXICITY: See precautions FINISH: High gloss or satin COVERAGE: Up to 14sq.metres/litre DRYING TIME: Touch dry 2 hours at 50% relative humidity RECOATING: After 8 hours POT LIFE: N/A MIXING RATIO: N/A THINNING: See ‘Application’ data. Weatherfast Brushing Thinners WEIGHT/LITRE: 0.91kg VOLUME SOLIDS: 43% FLASH POINT: 32°C CLEAN UP: Weatherfast Brushing Thinners

U.N. NUMBER: 1263 Page 2 – Poly clear PREPARATION: Bare timber: Ensure the surface is clean, dry and well sanded. Remove all dust from the grain using a rag moistened in mineral turps, Norglass Epoxy Thinner or Acetone. Previously varnished timber: If the old coating is intact and in good condition, wash down with detergent and warm water and lightly sand to a dull finish. Cracked or peeling varnish should be removed back to clean timber otherwise a failure will result. APPLICATION: Varnishes or Clears should not normally be thinned for the first coat unless penetration is desired (on softwoods...