Weatherfast Poly Clear
4Pages

WEATHERFAST POLY CLEAR GLOSS JULY 2014 PRODUCT DATA SHEET NORGLASS LABORATORIES PTY.LTD. A.B.N. 92 001 807 245 P.O. Box 312, Neutral Bay. NSW 2089 Australia 59 Moxon Road, Punchbowl NSW Ph: 61 2 9708 2200 Fax: 61 2 9796 3069 Email: norglass@bigpond.net.au www.norglass.com.au WEATHERFAST POLY CLEAR GLOSS DESCRIPTION: A one pack clear, low odour gloss with excellent durability and abrasion resistance. (Read the information guide on “The Good Oil on Clear Coatings”.) Contains a high level of ultra violet screening agents making it suitable for exterior and interior use. Ideal for floors, furniture and all marine applications especially in heavy duty areas. Has very good water resistance, although not recommended for areas of constant immersion. Pale amber High gloss DRYING TIME: Touch dry 2 hours at 50% relative humidity MIXING RATIO: See ‘Application’ data. Weatherfast Brushing Thinner. VOLUME SOLIDS: FLASH POINT: Weatherfast Brushing or Spraying Thinner.

WEATHERFAST POLY CLEAR GLOSS Bare timber: Ensure the surface is clean, dry and well sanded. Remove all dust from the grain using a rag moistened in NORCLEAN-PLUS, NORGLASS EPOXY THINNER or ACETONE. Previously varnished timber: If the old coating is intact and in good condition, wash down with detergent and warm water and lightly sand to a dull finish. Cracked or peeling varnish must be removed back to clean timber otherwise a failure will result. Varnishes or Clears should not normally be thinned for the first coat unless additional penetration is desired (on softwoods for example). Where...

WEATHERFAST POLY CLEAR SATIN JULY 2014 PRODUCT DATA SHEET NORGLASS LABORATORIES PTY.LTD. A.B.N. 92 001 807 245 P.O. Box 312, Neutral Bay. NSW 2089 Australia 59 Moxon Road, Punchbowl NSW Ph: 61 2 9708 2200 Fax: 61 2 9796 3069 Email: norglass@bigpond.net.au www.norglass.com.au WEATHERFAST POLY CLEAR SATIN DESCRIPTION: A one pack clear, low odour satin with excellent durability and abrasion resistance. (Read the information guide on “The Good Oil on Clear Coatings”.) Contains a high level of ultra violet screening agents making it suitable for exterior and interior use. Ideal for floors,...

WEATHERFAST POLY CLEAR SATIN Bare timber: Ensure the surface is clean, dry and well sanded. Remove all dust from the grain using a rag moistened in NORCLEAN-PLUS, NORGLASS EPOXY THINNGER or ACETONE. Previously varnished timber: If the old coating is intact and in good condition, wash down with detergent and warm water and lightly sand to a dull finish. Cracked or peeling varnish must be removed back to clean timber otherwise a failure will result. Varnishes or Clears should not normally be thinned for the first coat unless additional penetration is desired (on softwoods for example). Where...