*mynauticexpo

Catalogs
Norglass
Noseal wood treatment

Noseal wood treatment

Product catalog summary

Description: Norseal Epoxy Wood Treatment is a thin epoxy resin solution designed to waterproof and protect timber by locking out moisture.

Uses: It is ideal for use on chipboard furniture and flooring as a waterproof barrier. It can be painted over with various types of paint after the appropriate curing period.

Properties:

Color: Clear when mixed
Toxicity: Refer to precautions
Finish: Clear
Coverage: Up to 10 sq. meters per liter, depending on timber density
Drying Time: Surface dry in 1 hour
Recoating: After 48 hours
Pot Life: More than 12 hours at 50% relative humidity
Mixing Ratio: 1:1 by volume (base to hardener)
Thinning: Not recommended
Weight/Liter: 0.94 kg (mixed)
Volume Solids: 38% (mixed product)
Flash Point: 27°C (Tag closed cup)
Clean Up: Use Norglass Epoxy Thinner

Preparation: Ensure timber is clean and dry. Remove sanding dust with Norglass Epoxy Thinners. For rot-affected timber, remove severely damaged areas before treatment.

Application: Mix equal volumes of base and hardener, stir thoroughly, and let stand for 5 minutes. Apply with a brush or roller. For porous wood, apply a second wet coat. Allow 48 hours for solvent migration before recoating.

Transportation: Classified as a flammable liquid, Dangerous Goods Class 3.2, HAZCHEM 3[Y] P.G. III. Available in various pack sizes.

Precautions: Avoid skin contact and smoking during application. Use protective gear and ensure adequate ventilation. In confined spaces, use an air-fed face mask.

First Aid:

Skin Contact: Wash with soap and water
Eye Contact: Rinse with water for 15 minutes and seek medical advice
If Swallowed: Do not induce vomiting, give water, and seek medical advice

Special Instructions: Lightly sand between coats if more than 24 hours elapse. Not suitable for direct sunlight exposure due to poor UV resistance. No additional protection needed for internal areas shielded from sunlight.

Disclaimer: Advice and information provided by Norglass are given in good faith but without liability or responsibility.

Catalog excerpts

Aug 07 PRODUCT DATA SHEET NORGLASS LABORATORIES PTY.LTD. A.B.N. 92 001 807 245 P.O. Box 312, Neutral Bay. NSW 2089 Australia 59 Moxon Road, Punchbowl NSW Ph: 61 2 9708 2200 Fax: 61 2 9796 3069 Email: [email protected] www.norglass.com.au NORSEAL EPOXY WOOD TREATMENT DESCRIPTION: A thin solution of epoxy resin compounds to lock out moisture and waterproof timbers. USES: Ideal on chipboard furniture and flooring as a waterproof barrier. Can be painted over with any type of paint, water based, solvent based or chemically Cured 2 pack product after appropriate curing period. PROPERTIES (at 20°C) COLOUR: Clear when mixed. TOXICITY: See precautions. FINISH: Clear COVERAGE: Up to 10sq.metres/litre depending on timber density DRYING TIME: Surface dry in 1 hour RECOATING: After 48 hours (See ‘Applications’) POT LIFE: More than 12 hours at 50% relative humidity MIXING RATIO: 1 part base to 1 part hardener by volume THINNING: Not recommended WEIGHT/LITRE: 0.94kg (mixed) VOLUME SOLIDS: 38% (mixed product) FLASH POINT: 27 Tag closed cup (solvent) CLEAN UP: NORGLASS EPOXY THINNER U.N. NUMBER: 1306

Open the catalog to page 1

Page 2 - Norseal PREPARATION: Clean dry timber: Remove sanding dust by wiping down with NORGLASS EPOXY THINNERS. Soft, rot affected timber: Where the wood has lost a substantial amount of its original value through dry rot it is advisable to cut out the worst affected parts before treating the remainder. APPLICATION: After mixing an equal volume of NORSEAL Base and Hardener, stir thoroughly and let stand for 5 minutes before using. Apply the product to the bare wood by brush or paint roller in a liberal manner. Where the wood is very porous, go back over the area after a few minutes with another...

Open the catalog to page 2

Noseal wood treatment

Noseal wood treatment

Catalog excerpts

All Norglass catalogs and brochures