NORTHANE CLEAR GLOSS JULY 2014 PRODUCT DATA SHEET NORGLASS LABORATORIES PTY.LTD. A.B.N. 92 001 807 245 P.O. Box 312, Neutral Bay. NSW 2089 Australia 59 Moxon Road, Punchbowl NSW Ph: 61 2 9708 2200 Fax: 61 2 9796 3069 Email: [email protected] www.norglass.com.au NORTHANE CLEAR GLOSS DESCRIPTION: A 2 pack, non-yellowing, polyurethane with outstanding chemical and abrasion resistance. Water clear when cured. Excellent gloss retention and fade resistance under extreme weather conditions. Aircraft exteriors, boats, buses, earthmoving equipment, anti-graffiti applications, hospital walls and floors, furniture, fish ponds and food surfaces. Ideal on timber, steel, aluminium and fibreglass as a durable waterproof, finish coat. Water clear. Exceptionally high gloss. Also available in satin by using Norglass Flattening Agent (See data sheet) DRYING TIME: Touch dry 1 hour. Recoat after 16 hours. Hard dry 48 hours Spraying: wet on wet technique Brush/Roller: After 16 hours MIXING RATIO: 2 parts Northane base to 1 part Northane hardener by volume Spraying: Northane Spraying Thinners 33 1/3% at 50-70 P.S.I or according to the pressure system used. Brushing: Northane Brushing Thinners up to 3% VOLUME SOLIDS: FLASH POINT: NORGLASS SPRAYING THINNERS OR NORTHANE BRUSHING THINNERS

NORTHANE CLEAR GLOSS Northane Clear Gloss should only be applied over sound surfaces, cracked varnishes should be removed completely. Recoating old Northane surfaces require degreasing and a light sand to a flat finish before proceeding. Note: All surfaces to be finished in NORTHANE CLEAR should be thoroughly cleaned down to remove any traces of waxes, polishes and oils. Where silicone polish has been used previously consult NORGLASS TECHNICAL ADVISORY DEPT on (02) 9708 2200 for the best method of removal, and read the Norglass directions on appropriate label specifications and M.S.D.S. on this...