Grey-Away Grain Restorer

Product catalog summary

Product Overview:
Grey-Away Grain Restorer is a concentrated solution designed to restore the natural color of timber before clear coating and to remove stains from fiberglass surfaces.

Properties:

Color: Light Green
Coverage: Up to 5 sq. meters per liter
Mixing Ratio: 1:1 by volume with fresh water
Weight per Liter: 1 kg
Clean Up: Water
UN Number: 3265

Application Instructions:

Wash the surface with fresh water.
Apply diluted Grey-Away (1:1 with water) using a stiff bristle nylon brush, scrubbing with the grain.
Leave for 15-20 minutes, reapplying if the surface dries.
Rinse off with full water pressure and allow to dry.

Transportation and Safety:

Classification: Class 8 Corrosive Substances
HAZCHEM: 3 [Y] P.G.III
Precautions: Wear protective clothing, goggles, and gloves. Dilute runoff with water or neutralize with baking soda.
First Aid: Do not induce vomiting if swallowed; seek medical attention. Flush eyes with water if splashed. Remove to fresh air if inhaled. Wash skin with soap and water if contact occurs.

Special Instructions: Keep the lid tightly closed when not in use and store away from children.

Disclaimer: Any advice or information provided by NORGLASS is given in good faith but without liability or responsibility.

Catalog excerpts

GREY- AWAY JULY 2014 PRODUCT DATA SHEET NORGLASS LABORATORIES PTY.LTD. A.B.N. 92 001 807 245 P.O. Box 312, Neutral Bay. NSW 2089 Australia 59 Moxon Road, Punchbowl NSW Ph: 61 2 9708 2200 Fax: 61 2 9796 3069 Email: [email protected] www.norglass.com.au GREY- AWAY GRAIN RESTORER DESCRIPTION: Concentrate USES: For restoring the natural colour of timber prior to clear coating. It can also be used for removing stains on fibreglass surfaces. Light Green DRYING TIME: MIXING RATIO: Mix with equal parts fresh water VOLUME SOLIDS: FLASH POINT:

Open the catalog to page 1

GREY- AWAY Wash the surface over with fresh water. Apply the Grey-Away to the surface after diluting with equal parts water. Scrub in with a stiff bristle nylon brush (with the grain) and leave for 15-20 minutes. If the surface starts to dry off apply more Grey-Away. Then hose off with full water pressure and allow to dry. Class 8 Corrosive Substances HAZCHEM 3 [Y] P.G.III SIZES: Wear protective clothing, goggles and gloves when applying. Where run off occurs into garden areas, dilute with copious amounts of fresh water or neutralise with a weak solution of baking soda. If swallowed DO NOT induce...

Open the catalog to page 2

All Norglass catalogs and brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list