FLATTENING AGENT JULY 2014 PRODUCT DATA SHEET NORGLASS LABORATORIES PTY.LTD. A.B.N. 92 001 807 245 P.O. Box 312, Neutral Bay. NSW 2089 Australia 59 Moxon Road, Punchbowl NSW Ph: 61 2 9708 2200 Fax: 61 2 9796 3069 Email: [email protected] www.norglass.com.au PRODUCT: FLATTENING AGENT DESCRIPTION: A white silica lightweight powder. For reducing the gloss values in gloss paints. 100g addition for a 4 litres gloss paint. 25g for 1 litre. DRYING TIME: MIXING RATIO: WEIGHT/LITRE: VOLUME SOLIDS: Compacted Density Method approx. 50grams per litre FLASH POINT: With recommended solvent for paint used

FLATTENING AGENT PREPARATION: If being used in Northane, pour the stated amount into the base can of paint. Pour in gently in a still environment and reseal the lid tightly. Then shake the can vigorously for 30 seconds to wet the flattening agent out. Remove the lid and stir in thoroughly with a paint stirring blade until the Flattening Agent is dispersed. Then add in the hardener and stir again. Strain before the use. On single pack paints like Weatherfast, pour out 50% of the contents into another container. Pour in the flattening agent carefully into the original can and seal the lid tightly....