June 2003 PRODUCT DATA SHEET NORGLASS LABORATORIES PTY.LTD. A.B.N. 92 001 807 245 P.O. Box 312, Neutral Bay NSW 2089 Australia 59 Moxon Road, Punchbowl NSW Ph: 61 2 9708 2200 Fax: 61 2 9796 3069 Email: [email protected] www.norglass.com.au EPOXY LAMINATING RESIN DESCRIPTION: A high strength laminating resin with excellent waterproofing and adhesive properties. USES: For use with Dynel cloth, fibreglass and other composite reinforcing materials. PROPERTIES (at 20°C) COLOUR: Clear when mixed TOXICITY: See Precautions FINISH: Clear COVERAGE: Varies according to reinforcing used DRYING TIME: 1-2 hours (surface) 90% in 24 hours, 100% 7-10 days RECOATING: Overnight POT LIFE: 500mls: 15 minutes in mass, 30 minutes if volume is spread out MIXING RATIO: 2:1 by volume THINNING: N/A WEIGHT/LITRE: 1.066 (mixed material) VOLUME SOLIDS: 86% (mixed materials) FLASH POINT: -7° Abel (solvent content) CLEAN UP: NORGLASS EPOXY THINNERS U.N. NUMBER: None allocated (base), 1866 (Hardener) Page 2 – GP Epoxy Resin PREPARATION: Refer to NORGLASS REINFORCING GUIDE.

APPLICATION: Varies according to reinforcing methods. Mixing is carried out by placing 2 equal volumes of resin into a clean container and then adding 1 equal volume of G.P. Epoxy Hardener. Thorough stirring is essential. The mixed volume is then transferred to shallow paint trays to maximise the working time. Application is normally carried out with a short nap paint roller and clean paint brush. TRANSPORTATION: Hazchem 3[Y] P.G. III Dangerous goods class 3.2 SIZES: (Packs) 30litre, 6litre, 3litre, 1.5litre and 750ml. PRECAUTIONS: Mild skin irritant. Some allergic reactions can occur. If this...