POLYESTER SKIN FINISHED PANELS The genu ine HONEYCO MB UNIQUE PROCESS TECHNICAL DATA SHEET CHARACTERISTICS PROPERTIES Material Cell size Honeycomb characteristics NIDASKIN POLYESTER 8 mm hexagonal cells Excellent resistance to water**, most acids, bases and salt solutions Chemical properties Heat insulation for 20 mm honeycomb core Heat insulation for 90 mm honeycomb core Compressive strength* Shear strength* White GRP - Glass Reinforced Plastic (RAL 9016) Skin thickness Peelable protective film Sandwich panel characteristics Skin / honeycomb gluing Polyurethane hotmelt Non-trimmed size Thickness Surfacic mass Other sizes and thicknesses *Average value for a thickness of 20 mm and 20°C room temperature. Characteristics depending on thickness. Contact us for more information ** It is assumed that the material does not absorb water (or just a very small quantity) NOTA : The indicated directions can serve as a guide to use the product but cannot be considered as a guarantee of a good working up. Additionally application, utilization and/or transformation of the products escape our control possibilities. As a consequence, they exclusively remain the responsibility of the user and/or the transformer. Visit our website www.nidaplast.com or contact us +33 (0)3 27 44 72 01 Skin characteristics Extruded polypropylene honeycomb is isotropic (same behavior in a

Approximate bending resistance* CONDITIONS : DISTRIBUTED LOAD AND SIMPLY SUPPORTED LOAD (Kg/m²) LOAD (Kg/m²) Panel thickness *These values are given as a guideline and might vary depending on the implementation of the product, therefore, they are non binding LOAD FOR A 1/200TH OF THE SPAN DEFLECTION DEPENDING ON THE HONEYCOMB THICKNESS LOAD RESISTANCE (Kg/m²)