Newmar_DPO_Power_Catalog
16Pages

attery Chargers • Inverters • DC Converters • Power Supplies DC Power Conditioners • DC Power Stabilizers

Programmable: ■ Battery Types ■ Operating & Alarm Parameters Self-Monitoring/Diagnosis Reported On-Screen: ■ Operational Data ■ Out of Limit Conditions ■ Component Fault Identification Form C Remote Monitor Relay Outputs; ■ AC Fail, DC Voltage Low/High Onboard Serviceability: ■ Plug-In Replacement Components ■ Charger Remains Insalled On Vessel The PTMP represents a new level of functionality, reliability, and serviceability in very smart battery charging for critical 24 volt systems aboard work boats, military, commercial, and recreational craft. A menu of pre-programmed battery...

PTMP Chargers - 24V Modular Programmable Operation Status Screen A 2” x 2.6” Front panel LCD screen provides system status information: System Status VOLTS - BANK # 1 2 3 27.2 27.0 27.5 TOTAL OUTPUT AMPS 100 CHARGER MODE ON - FLOAT BATT TEMP BANK 1 2 3 72 80 77 • DC volts per battery bank • Recondition cycle in process • Total charger output amps • Absorption stage timed out • Charge stage mode (bulk, • Equalize mode time remaining absorption float) • Alarm conditions (see self• Battery temperature (per enabled diagnostics section below for list of temp probe) alarm monitored functions)...

Battery Chargers - Phase Three Series 12 Volt TYPE APPROVED PRODUCT “Smart” battery charging technology for 12, 24 and 32 volt systems aboard workboats, military vessels, commercial vessels, and recreational craft. These chargers interact with batteries providing the optimum three stage charge process for fast recovery and conditioning, maximizing performance and extending battery life. Features • “Smart” circuitry provides three stage charging: bulk, absorption, float • Gel-Cell/Flooded Lead-Acid/AGM battery type switch selects optimum charge/float voltages • Optional sensor adjusts output...

Input VAC Max Output Amps Output Banks Battery Capacity (Amp-Hours) Case Size Ref. Temp Sensor Type N/A TCS-12/24 TCS-12/24 TCS-12/24 TCS-12/24 Remote Panel Model N/A RP RP EVM RP Options Accessories Remote Panel, model RP (applicable to most models, see matrix) LED's indicate charger output stage Temperature Compensation Sensor See matrix for applicable type per charger model: TCS-12/24 or TP ■ AC input breaker ■ Output voltage adjust ■ Digital DC volt meter with alarm ■ AC fail contacts (see page 6 for specs.) Case Size Inches Ref H W D A-l 10.5 5.0 2.8 DC Power...

The PTMS charger provides a significant improvement in DC system reliability by utilizing multiple independent charger modules that plug into the bulkhead mounted case, and should a fault occur in one module, the system continues to operate, thus is considered "fault" tolerant. The system consists of a wall mount case which serves as connection point to AC input and 24V, 3 battery bank output and contains three front-facing power bays, each accommodating a 22.5 amp charger module which slides and locks in place creating a 24V, 67 amp charger. If a module fault occurs, a front panel...

Phase Three - Monitor/Control Unit Designed for installation in conjunction with most models of PT Battery Chargers, this unit provides additional functionality in monitoring, control, and alarms. It contains a 3 battery bank Digital DC volt meter, a PT charger float voltage adjustment, and AC Master circuit breaker for control and protection of charger input power. A 10 foot wiring harness is provided for AC input and DC monitor wiring to the charger. The unit carries ABS type approval for Charging Systems, thus providing full compatibility when paired with PT chargers which are also ABS...

The PS Series inverters produce high efficient, pure sine wave output from 12 or 24 volt battery input with high surge power for motor start. A power saving mode, with user friendly adjustable set points, conserves batteries when not in use. A remote control/display panel and front panel indicator lights allow for easy system monitoring and control. — Remote Panel Included Features • 1000, 1500, 2000W models • Pure sine wave 115V output • High efficiency ~ 90% • Power saving mode conserves battery when not in use, user adjustable set points • AC duplex outlet on front panel • Status...

Inverter-Chargers - Torque Series TQ Inverter-Chargers deliver pure, sinusoidal AC for flawless operation of all appliances and sensitive electronics. These units are ideal for entertainment systems, and computers and other microprocessor based equipment which are intolerant to AC wave distortion. They provide peak power for motor starting, and high continuous duty ratings. Whenever shore or generator AC power is available, a built-in automatic transfer switch activates the multi-stage, temperature compensated battery charger providing rapid and safe replenishment of the inverter battery...

Electronics require a clean and reliable source of DC power for proper operation, they are highly vulnerable to shut down / reboot / data corruption caused by power drop out during engine start and low voltage from over worked batteries. RF Interference generated by alternators and motors also impedes proper operation. A DC UPS is the remedy to these issues Below are several choices of DC UPS solutions, depending on the type, duration, severity of power issue encountered, and level of protection desired. StartGuard This unit has an internal battery that supplies supplemental power to...

Integrated Power System The Integrated Power System (IPS) is a unique multifunction power supply which incorporates built-in battery back-up and numerous power accessories within a rackmount chassis. The internal batteries are always in-line with the load, thus there is no interruption in the event of AC loss. Batteries are recharged when AC is restored. A manual battery disconnect switch allows internal or external battery service or replacement while the system is running. Features ■ Precision regulated power supply simultaneously maintains batteries at peak charge and supplies system...