Mobile DC Power Solutions: DC UPS ■ Battery Chargers ■ Power Supplies ■ Inverters ■ DC Converters ■ DC Power Stabilizers ■ Distribution ■ Low Voltage Disconnects ■ Power Timer ■ Battery Integrators & Isolators ■ Noise Filters ■ Automatic Power Selectors ■ Solar Panels ■ Custom Electrical Panels ■ Meters ■ Accessories

The Mobile Network Solutions DC UPS Input: 12 & 24 VDC Output: 12 & 24 VDC, 5 - 20 Amps Battery Chargers Input: 120 & 240 VAC Output: 12 & 24 VDC, 7 - 95 Amps AC-DC Power Supplies Input: 115 & 230 VAC Output: 12 & 24 VDC, 8 - 35 Amps DC-AC Inverters Input: 12 & 24 VDCVoltage/Power Range: Output: 12 & 24, 1,000 - 4,800 Watts DC-DC Converters Input: 12, 24, & 32 VDC Output: 12 & 24, 3 - 35 Amps DC Power Conditioners Input: 12 & 24 VDC Output: 12 & 24 VDC, 3 - 10 Amps DC Power Distribution Input: 12 VDC Output: 12 VDC, 100 Amps Low Voltage Disconnects Input: 12, 24 & 48 VDC Current Rating: 30 -...

The Mobile Data Power, model MDP-25.0, is a DC UPS that solves the common problem of lengthy reboot sequences, system crash, data and hard drive corruption in mobile computer work stations due to a low voltage and loss of power as a result of intermittent or poor vehicle battery condition. In addition, the MDP provides a low voltage output warning signal to terminals (such as Motorola® MW 800 series work stations) allowing orderly automatic shutdown of the powered device, protecting data and preventing hard drive corruption. Utilizing a high speed sensor circuit, when primary vehicle voltage...

WITH BACK UP BATTERY M0DEL:NP-12 Mobile communication electronics such as programmable two-way radio and data transceivers, vehicle location systems and other microprocessor-controlled devices require clean and steady DC input power. Their sensitive circuitry is highly vulnerable to voltage drop from engine start, noise and line spikes from alternators and motors, and conducted noise from various other electronic devices. NAV-PAC prevents all of these problems and is in use by thousands of Emergency Vehicles nationwide. Features ■ Prevents voltage "drop-out” during engine start ■ Absorbs line...

voltage drop that accompanies engine starting can cause microprocessor-based voice and data programmed memory. The abrupt DC system transmitters to "dump” StartGuard solves this problem by providing supplemental voltage to sensitive electronics while the engine is cranked. It contains a sealed rechargeable battery which is switched on-line to electronics when the starter switch or solenoid is engaged. When the engine is running StartGuard automatically goes off-line and the internal battery is recharged by the alternator. Specifications Input Voltage: 13.8 - 14.8 VDC nominal, 15.5 VDC max. Relay...

Battery Chargers - Phase Three Series Phase Three “Smart” battery charging technology is now available in a wide range of power levels, allowing you to select the right size, features and flexibility you require for virtually any application from providing quick recharge of auxiliary batteries in vehicles parked in the station house, to powering continuous loads and maintaining peak charge in battery systems in mobile as well as industrial generator applications. These chargers interact with batteries to put them through the optimum three stage charge process which provides for fastest recovery...

Features ■ Excellent Regulation and Ripple Spec: Output voltage maintained within 1% under all rated line and load line and load conditions ■ Polyurethane conformal coated PC board and corrosion resistant heavy duty aluminum case with integral shock mounts assures survival in hostile environments ■ Heat generated by semi-conductors is extracted and dissipated by large heat sink fins for cool operation ■ Protection: over-voltage, current limit; (set @ 105% of intermittent rating), thermal overload and input/output fusing ■ Thermally activated cooling fan on ”CD” units Specifications Input Range 105-125...

IC Series Inverter-Chargers These inverter-chargers deliver pure, sinusoidal AC for flawless operation of all appliances and sensitive electronics and contain charger to replenish battery when AC is present. ■ Generates "Perfect Wave" 120 VAC for powering highly input-sensitive computers, electronic controllers/processors ■ Built-in high output three stage, temperature compensated charger for rapid battery bank replenishment - programmable for gel-cell, lead-acid or AGM battery type with amp-hour capacity selector ■ UL Listed Model: ICR-2 Specify 25 or 50 feet or wire length Inverter Output:...

Convert 20-50 VDC to 12 or 24 VDC negative ground output for powering communication/ navigation equipment, on negative ground systems. Ideal for powering voice and data transceivers in mobile applications. Features ■ Excellent Regulation: Output voltage maintained within 1% under all line and load conditions within rating ■ Heat generated by semi-conductors is extracted and dissipated by large heat sink fins that maximize air contact for cool operation and long life of components ■ Polyurethane conformal coating on PC boards and corrosion-resistant anodized aluminum case with heavy duty shock...

Isolated Series This series provides voltage conversion as well as input/output isolation, allowing use of negative ground electronics on off-highway vehicles which typically employ positive ground battery systems. May also be used as a voltage stabilizer and filter for sensitive equipment. Features ■ Automatic re-setting thermal shutdown ■ High/low input voltage shutdown ■ Power ”ON” light ■ Polyurethane conformal coating on PC board ■ Rugged case designed for high vibration applications ■ Wide range of input voltage ■ Precise output voltage regulation ■ Reverse polarity protection ■ Input fuse/Output...

These "UP" converters produce 24 volts from 12 volt systems and are ideal for managing dual voltage applications on mobile applications without having to install a 24 volt battery and dedicated charging system. Choose from two types depending on your application: In the Standard, Non-Isolated Series the 12V input and 24V output share a common negative ground and are ideal when installing certain electronics that operate better on 24 volts when a robust 12 volt system exists. Models available in outputs of 7, 16 and 25 amps. The Isolated Series allows compatibility between positive and negative...