CONCLUSION: The sample satisfies to the clauses examined Approved by, Project Engineer Product Line Manager David WANG This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents._ LCIE CHINA Building 4, No. 518, Xin Zhuan Road, CaoHejing Songjiang High-Tech Park, Shanghai P.R.C (201612)Page 1 of 4 Tel: +86 21 6195 7000 Fax: +86 21 6195 7001 Email: [email protected]

HISTORICAL OF SAMPLE RECEIVED LCIE CHINA RECORDED N° COPY OF RATING PLATE: NOTE: Only markings in <language> present on the sample tested were checked and validated during this examination. The text required by the standard should be translated into the official language of the country where the appliance will be sold. The results of this test are solely based on the samples received. LCIE CHINA Building 4, No. 518, Xin Zhuan Road, CaoHejing Songjiang High-Tech Park, Shanghai P.R.C (201612)

PICTURE OF THE SAMPLE TESTED LCIE CHINA 必维欧亚电气技术咨询服务（上海）有限公 司 Building 4, No. 518, Xin Zhuan Road, CaoHejing Songjiang High-Tech Park, Shanghai P.R.C (201612) Page 3 of 4

Vibration test standard： This vibration test in according to ISO 5349-1:2001, ISO 5249-1:2001 and reference ANNEX I OF EN 62841-2-1:2018 +A11:2019+ A1:2022 +A12:2022. Vibration test condition： Drilling vertically down into a concrete block having the dimensions 500 mm × 500 mm and 200 mm in height and supported on resilient material, use max. drill bit which provided with impact cordless drill, 150 N in addition to the weight of the drill vertically down, measurement starts when the drill bit has contact to the concrete block and stops at a drilling depth of 80 mm before the drill bit is removed...