Wind Speed Sensor with alarm outputs WSM 102 DIMENSIONS FEATURES two adjustable alarm outputs + pulse output no need for external controller replaceable anemometer cups transient voltage protection ball bearing optional heating TECHNICAL DATA Operating voltage: Current consumption: Wind speed measurement range: Alarm setting range: Setting of alarm level: Hysteresis: Averaging Period: Output signal: WSM 102/1: WSM 102/2: Temperature Operating Range: Accuracy: Sensor type: Reverse polarity protection: Transient voltage protection: Cable: Bearings: Material housing: cups: Mounting : 6...30 V DC 10 mA (with optional heating max 1 A) 0,8 - 55,0 m/s 1 - 50 m/s with magnetic key in 1 m/s steps 10 % 3 seconds 1 x PNP, I max = 300 mA 2 x PNP, I max = 300 mA + PNP pulse 1,1 Hz / m/s -35 to +60 oC +/- 4 % Hall sensor YES YES 5 x 0,25 mm2; 3 m standard 2 x precision stainless steel Ball bearing PE PA the sensor mounts on a pipe with ø27 mm outside diameter Models: WSM 102/1 (one alarm output) WSM 102/2 (two alarm outputs + pulse output) WIRING ________________________________________________________________________________________ NAVIS elektronika, Poljska c.11, SI-1241 Kamnik Tel.: +386 1 831 06 20 ; Fax+386 1 831 06 25, www.navis-anemometers.com E-mail: [email protected] www.navis-elektronika.com