long range wireless anemometer type WR3-A with audible alarm for exceeded wind speed WINDY WR3 is a long range portable wireless anemometer. It has handheld/portable display unit and sensor suitable for both - permanent and temporary installation. Sensor with ball bearings and life time battery ensure long period without servicing. Sensor send data every 2 second so you have instant information about wind speed anywhere in the 400 m radius from the sensor. Each sensor has his own adress so several anemometers can operate in close proximity without disturbance. O stainless steel ball bearings ensure long life of the sensor O Lithium battery for life time operation long range - distance between sensor and display unit up to 400 m O schock resistant display unit with rubber sides C large digits on illuminated LCD display ensures excellent visibility C low power consumption allow long operation time V easy replaceable anemometer cups O current wind speed C maximum wind speed C average wind speed (selectable averaging) O all standard units (knots, m/s, Km/h, mph) O temperature in Celsious or Fahrenheit degree C wind chill - subjective ambient temperature dependent on wind alarm for exceeded wind speed (type WR3-A) TECHNICAL DATA Measurement range : Measurement range - temperature: Units of measurement - temperature: Resolution wind speed: Resolution - temperature: Accuracy - wind speed: Accuracy - temperature: Averaging period - selectable: Display updating: Data transmission: Transmision frequency: Battery - sensor: Battery life - sensor: Battery - display unit: Battery life - display unit: Battery life with backlighting: Dimensions - sensor: Dimensions - display unit: Lithium battery the sensor mounts on a pipe NAVIS elektronika, Poljska c. 11, SI-1241 KAMNIK Fax:+386 1 8310 625 E-mail: ¡[email protected] www.navis-anemometers.com