Wind Speed Sensor Tip: WSS 100/HALL Senzor: Hallov senzor TECHNICAL DATA Tip: WSS 100/REED Senzor: reed rele Type: WSS 100/HALL Sensor: Hall sensor Tip: WSS 100/REED Senzor: reed rele Type: WSS 100/REED Sensor: reed contact BROWN WHITE NAVIS elektronika E-mail: [email protected] www.navis-elektronika.com, www.navis-anemometers.com Type: WSS 100/REED Sensor: reed contact Type: WSS 100/HALL Sensor: Hall sensor ________________________________________ Wind speed measurement range: 0,8 - 55,0 m/s ________________________________________ Operating voltage: 5...24V DC ________________________________________ Signal output (WSS 100/hall): pulse (1 pulse/rotation) Hall: NPN transistor, open colector, I max = 20 mA Signal output (WSS 100/REED): + pulse (1 pulse/rotation) contact rating 10 mA maximum _ ________________________________________ Current consumption (WSS 100/HALL): 7 mA ________________________________________ Output frequency: 1,1 HZ / m/s ________________________________________ + Temperature Operating Range: -25°C to +60°C ________________________________________ _ Accuracy: +/- 4% ________________________________________ Sensor type: WSS 100/HALL - Hall effect sensor WSS 100/REED - 1 x REED contact ________________________________________ Cable: 4 x 0,34 mm2 ; 5 m standard ________________________________________ Bearings: 2 x stainless steel Ball bearing ________________________________________ Material housing: Anodized AL cups: PA ________________________________________ Mounting : the sensor mounts on a pipe with ø 20 mm outside diametre Tip: WSS 100/HALL Senzor: Hallov senzor Tip: WSS 100/REED Senzor: reed rele Type: WSS 100/REED Sensor: reed contact