P1
2Pages

{{requestButtons}}

Catalog excerpts

P1 - 1

P1 1-pack universal primer for adhesion & protection I? • The printing process may render some of the colour samples imperfectly. We recommend testing the paint before committing to a colour. PRODUCT DESCRIPTION Nautix P1 is a quick drying conventional 1-pack primer for application above and below the waterline. P1 is recommended for all substrates : - Adhesion over Gelcoat (especially for paints like antifoulings). - Impregnation and protection over wood. - Anticorrosion protection over steel. P1 primer is very easy to use, and can be used as good barrier coat over unknown or incompatible antifoulings (2 coats minimum of P1). P1 must be applied in 1 coat for adhesion and minimum 3 coats for protection. PRODUCT INFORMATION Finish Coverage Flash point Unit size Typical shelf life Thinner/Cleaner Colours Matt 8.5m2/L per layer (roller/brush) 23°C <FP<55°C 0.75L - 2.5L - 5L - 20L 5 years Nautix DP metallic grey Drying / Overcoating Information! d=days h=hours min=minutes *Minimum overcoating time recommended for 1 layer (100pm wet thickness) - Please refer to Application TYPE OF SURFACES • GRP / Composites • Steel (for more details, please refer to our technical specifications for “Steel boat") • Wood (for more details, please refer to our technical specifications for “Wood boat") SURFACE PREPARATION New hull (epoxy or GRP) • The surface should be degreased with Nautix SD and free of all contaminants (oil, grease, salt etc). • Rinse with fresh water and let dry. • Sand with P120 grade paper to improve adhesion of primer. • Ensure the substrate to be dried, degreased, and free of dust. Over antifouling or existing primer • Remove the old antifouling : - 1 to 3 coats : Nautix STRIPPER - More than 4 coats : air-blasting, high-pressure water blasting or scraper • Check the condition of old primer : the former paint must not come unstuck from the support or must not crumble. Scrape with a brush to check support quality and remove any loosing paint. • Surface must be degreased with Nautix SD and dust free. • Rough sand with 120 grit to favour adherence. • Ensure the substrate to be dried, degreased, and free of dust. SAFETY INFORMATION Technical recommendation Apply the following number of coats : - GRP/Composites : 1 coat for adhesion, 3-5 coats for protection. - Wood/Plywood : 4 coats (1st layer with thinner DP up to 30%). - Metal : 5 coats for anticorrosion protection. P1 can be used as good barrier coat over unknown or incompatible antifoulings. • Work in well-ventilated area (ensure adequate ventilation during use), wear suitable protective clothing, gloves, glasses and eye/face protection. Unprotected person must be kept away from treatment area. Dispose of protective gloves and equipment after use. • Read the label safety section for Health and Safety Information before application. Nautix - Parc d'activites Les 5 chemins - 24 rue Nicolas Appert - 56520 Guidel, France Tel: +33.(0)2.97.65.32.69 Fax: +33.(0)2.97.65.03.54 info@nautix.com — www.nautix.com Before Printing, think about environment! 06/10/2016

Open the catalog to page 1
P1 - 2

P1 1-pack universal primer for adhesion & protection Application methods : brush, roller, airless. Apply between 10 and 30°C (ideally inside with hygrometry rate no greater than 85%). Do not apply when there is a chance of condensation forming on the substrate (Dew-Point) : substrate, ambient air and product temperatures must be close. Homogenize the product with a blender. It’s not recommended to sand between coats. If filling is required, use appropriate filler before the first coat of primer has been applied. Favour natural solvent evaporation and do not heat ambient air after beginning...

Open the catalog to page 2

All Nautix catalogs and brochures

  1. A3 White

    2 Pages

  2. A3 YACHTING

    2 Pages

  3. A4 YACHTING

    2 Pages

  4. A4 White

    2 Pages

  5. DP

    1 Pages

  6. DA

    1 Pages

  7. POLISH

    1 Pages

  8. STRIPPER

    1 Pages

  9. SD DEGRASER

    1 Pages

  10. NIGHT LIGHT

    2 Pages

  11. NAUTIX GRIP

    2 Pages

  12. DECK GRIP

    2 Pages

  13. VA2

    2 Pages

  14. STARWOOD

    2 Pages

  15. DB

    2 Pages

  16. L2

    2 Pages

  17. STARLAC

    2 Pages

  18. COOLBLACK

    2 Pages

  19. BLUE FILLER

    2 Pages

  20. WATERTIGHT

    2 Pages

  21. IMPREGARD

    2 Pages

  22. IMPREWOOD

    2 Pages

  23. IA

    2 Pages

  24. ACRALU

    2 Pages

  25. METAPOX

    2 Pages

  26. U3

    2 Pages

  27. U2

    2 Pages

  28. P7 Spray

    2 Pages

  29. PA

    2 Pages

  30. PO

    2 Pages

  31. HPE

    2 Pages

  32. EPOXYGARD

    2 Pages

  33. NX194

    2 Pages

  34. A8

    2 Pages

  35. PROPPACK

    2 Pages

  36. A2

    2 Pages

  37. A1

    2 Pages

  38. A3T.Speed

    2 Pages

  39. MARIN

    2 Pages

  40. A88 Formula+

    2 Pages

  41. A9T.Speed

    2 Pages

  42. A4T.Speed

    2 Pages

  43. A4 Formula+

    2 Pages