Group: Nautix
Catalog excerpts
IMPREGARD 2-pack solvent free Epoxy resin for fibre impregnation ?± o The printing process may render some of the colour samples imperfectly. We recommend testing the paint before committing to a colour. Nautix IMPREGARD is an innovated 2-pack impregnation resin developed for professional use. This resin has 2 objectives : Impregnate damaged laminates and repair fibreglass. IMPREGARD has an excellent adhesion capacity on fibreglass, carbon fibre, GRP, plywood, wood (except oily wood). IMPREGARD can be used as first step of our osmosis treatment for composites substrates. This solvent-free epoxy coating is a resin with high-wetting/Impregnation features providing a strong barrier against moisture, and this allows the resin to migrate into the composite and create a new sheath around damaged fibres. Slow hardening of IMPREGARD gives a wide overcoating period without sanding. Impregard is not really sensitive to amide bloom on the surface. Associated with Nautix fillers and EPOXYGARD, IMPREGARD constitutes a very efficient osmosis treatment which requires minimal sanding for applicators. d=days h=hours min=minutes * Pot life for a large tray ** Recommended time slot for 1 layer (100-15C^m wet thickness) - Please refer to Application Finish Mixing ratio (volume) Mixing ratio (weight) Colour Flash point Unit size Typical shelf life Cleaner Coverage Gloss 5 base / 3 hardener 100g base / 50g hardener Transparent FP>93°C 2.5kg 5 years Nautix DP 12m2/kg (planed surface), 8m2/kg ( sanded surface) • GRP / Composite /Polyester • Marine Plywood • Wood GRP or epoxy hull • Gel plane peeling or polyester grit blasting to abrade surface prior to treatment. • Rinsing with fresh water & drying of laminate. Repeat it to ensure removal of any unwanted (salt, soluble residue) and moisture. • Drying of laminate with adapted system depending on location and season: ventilation, air flow. • Keep readings of Temperature/Humidity system records by checking systematically above and below the waterline. • Ensure the substrate to be dried, and free of dust. • For curative osmosis treatment : refer to the "osmosis" specification. Marine Plywood and wood • The surface must be dried, degreased with Nautix SD and dust free before application • Surface must be very dried (moisture rate < 12% ) Technical recommendation Structure should be dried. The risk is to capture the moisture into the structure and lead to blistering or delamination. Do apply only on rigid wood (stable structure after immersion). Regularly check structure is watertight to avoid infiltrations. SAFETY INFORMATION Work in well-ventilated area (ensure adequate ventilation during use), wear suitable protective clothing, gloves, glasses and eye/face protection. Unprotected person must be kept away from treatment area. Dispose of protective gloves and equipment after use. Read the label safety section for Health and Safety Information before application. Nautix - Parc d'activites Les 5 chemins - 24 rue Nicolas Appert - 56520 Guidel, France Tel: +33.(0)2.97.65.32.69 Fax: +33.(0)2.97.65.03.54 info@nautix.com — www.nautix.com Before Printing, think about environment! 03/01/20
Open the catalog to page 1IMPREGARD Solvent free Epoxy resin for fibre impregnation Application methods : brush, roller. Apply between 15 and 25°C. Temperature may go down 10°C. Check amine blush before overcoating. Indoor recommended application with hygrometry rate no greater than 85%. Do not apply when there is a chance of condensation forming on the substrate (Dew-Point) : substrate, ambient air and product temperatures must be close. Use a large tray to limit exothermic chemical reactions Stir or shake individual components thoroughly. Add hardener to the Base, stir and leave for 10 minutes to allow bubbles to...
Open the catalog to page 2All Nautix catalogs and brochures
-
A3 White
2 Pages
-
A3 YACHTING
2 Pages
-
A4 YACHTING
2 Pages
-
A4 White
2 Pages
-
PERFORMER YACHTING
2 Pages
-
DP
1 Pages
-
DA
1 Pages
-
SCOURING ACID
1 Pages
-
POLISH
1 Pages
-
STRIPPER
1 Pages
-
SD DEGRASER
1 Pages
-
NIGHT LIGHT
2 Pages
-
NON-SKID COMPOUNDS
1 Pages
-
NAUTIX GRIP
2 Pages
-
DECK GRIP
2 Pages
-
VA2
2 Pages
-
STARWOOD
2 Pages
-
DB
2 Pages
-
L2
2 Pages
-
STARLAC
2 Pages
-
COOLBLACK
2 Pages
-
BLUE FILLER
2 Pages
-
WATERTIGHT
2 Pages
-
IMPREWOOD
2 Pages
-
IA
2 Pages
-
ACRALU
2 Pages
-
METAPOX
2 Pages
-
U3
2 Pages
-
U2
2 Pages
-
P7 Spray
2 Pages
-
PA
2 Pages
-
PO
2 Pages
-
HPE
2 Pages
-
EPOXYGARD
2 Pages
-
NX194
2 Pages
-
A8
2 Pages
-
PROPPACK
2 Pages
-
A2
2 Pages
-
A1
2 Pages
-
A3T.Speed
2 Pages
-
MARIN
2 Pages
-
A88 Formula+
2 Pages
-
A9T.Speed
2 Pages
-
A4T.Speed
2 Pages
-
A4 Formula+
2 Pages
-
A7T.Speed™ ANTIFOULING
2 Pages
-
P1
2 Pages
-
A3 Formula+ ANTIFOULING
2 Pages
-
WHITE T.SPEED™
2 Pages
-
NAUTIX MARINE PAINTS
36 Pages