HMC Telescoping Series Hydraulic Mini Crane 1100/1700lb 108 to 144in 499/771kg 2.74 to 3.66m 1,100/1,700lb (499/771kg) maximum hoist capacity, capable of the full rated capacity in any position without restriction. 9 ft. (2.74m) Stowed dimension, with hydraulic telescoping boom extension fully retracted, measured from the center of rotation to the end of the boom. 12ft (3.66m) Maximum reach with hydraulic telescoping boom fully extended. Hydraulic linear winch, a non-fouling design built into the extension (maintains constant cable length during extension and retraction of the boom extension). Features self-limiting travel, (two-block protection) self-locking load holding capabilities, L.O.P. (automatic lifting overload protection) for smooth, quiet cable payout and retrieval. Hydraulic boom luffing, capable of the full rated capacity at any boom angle. Aluminum hydraulic cylinders with integrated safety locking valves for safe operation, enhanced protection against corrosion and reduced weight. Hydraulic power rotation/slewing for enhanced control and ease of operation. Removable, waterproof hand held remote with weather connectors & wander-lead. Pedestal base deck mount, aluminum, cylindrical (round) or pyramid (square) design. Optional hydraulic power rotating/slewing through deck mount standpipe available. Hydraulic power unit, one-horsepower with tray for remote mount. The davit system is finished to our Nautical Structures high level of quality with urethane paint products. Our standard colors are Matterhorn white, Off white, and Snow white. All other colors will be special order and quoted upon request. System assembled and dynamic load tested prior to shipment. 1– YEAR WARRANTY including materials and workmanship, electrical, hydraulic and labor. See warranty for details.

Hydraulic Telescoping Mini Crane .CHANICAL SPECIFICATIO Hydraulic Boom Luffing from 0° through 58°. 3 ft. Hydraulic Boom Extension Reach (Minimum at 58° position): 53in -72in (134-183cm) Hydraulic Linear Winch system. Rigged 6:1 with stainless steel wire rope, brass weight and stainless steel safety snap hook. Hydraulic rotation pedestal mounting: 359° Optional hyd pwr rotating/slewing standpipe LECTRIC - HYDRAULIC SPECIFICATIONS Remote control switch is wired to a 20ft/ 6.1m removable 1 Hp Hydraulic power unit, 3000 psi / 203 bar, Fluid type: QS-888, ISO quality 17/15/12 Cable pay-out: System...