EZ-LD-EX HYDRAULIC LAY-DOWN DECK CRANE SYSTEM EZ-SYSTEMS LAY-DOWN TYPE HYDRAULIC DECK CRANE For over two decades the EZ-Systems Hydraulic Deck Crane has proven to be of the highest state-of-the-art yacht crane technology in an aesthetically pleasing design. Nautical Structures manufactures the Lay-Down crane design in capacities from 2200-pounds to over 11,000-pounds, with and without hydraulic telescoping boom sections. The EZ-2200-LD-FB shown (above) is a 2200-Lb / 1000-Kg capacity crane featuring a lay-down boom design, integrated into this vessel’s forward bulwarks for stowage. The crane has been engineered and designed to the MCA-LY2 “Mega Yacht Code”, compliant with LSA–Rules for vessels under 500-gt. The EZ-LD crane’s aluminum boom is capable of being loaded to its full safe working load capacity in any position without restriction. The intelligent engineering inherent in this design allows distributed load-deflection across the boom during moments of dynamic loading, reducing the amount of shock-loading transmitted to the deck. Virtually silent-operating, our Hydraulic Linear Winch system, a totally non-fouling winch design reflects the innovative and dependably safe operating characteristics built into the extending boom. This feature adds the additional element of operational safety as the winch travels with the boom during operation of the crane. This prevents any possibility of two-blocking the system causing damage to the Spectron line. Lloyd’s Register approved, the linear winch has been developed to meet all LSA Rules in application as a Rescue Boat Launching Davit. The Linear Winch is capable of being placed into a free-fall condition from the wireless controller (Rescue Boat Launching) or with lanyard control from the life boat (life boat launching). Releasing the switch or lanyard at any time during the free -fall will brake the winch and halt the fall. The crane features 330º hydraulic power rotation providing the ultimate in tender-handling convenience. Control of the crane is with a remotely operated wireless joy-stick proportional control on an optional-use removable pendant. Manual hydraulic controls are also provided, located behind a hinged and latched access panel. A weld-in deck platter is the typical mount for the EZ-Systems Lay-Down crane, although a standpipe mount may also be used in applications with GRP constructed vessels. The EZ-Systems Lay-Down crane is finished to our highest standards. The aluminum structure is etched and then primed with a two-part epoxy primer. Then the system is faired smooth, and then primed again. The crane is hand sanded, then moved into our heated finish booth where it is coated with a two-part AwlGRIP urethane spray-applied paint finish in a color of white to match your vessel. The crane system is static load tested to 2.2 x design load and then dynamic load tested to 1.1 x design load, with a classification society surveyor on premises for full class certification. 10351 72nd Street North • Largo, Florida 33777 • Phone: (727) 541-6664 Facsimile: (727) 541-6353 North America Toll Free: (888) 541-6664 Email: [email protected] www.nautical-structures.com

EZ-LD-EX HYDRAULIC LAY-DOWN DECK CRANE SYSTEM Pedestal bases are available and may be configured for specific applications. The basis of this crane‘s design is a very low-profile system, capable of being built into or hiding behind bulwarks. The very low-profile design depicted requires a foundation mounting plate built into the vessel’s deck structure. Floating-Flange standpipe mounting is available. Standpipe diameters will vary depending on the actual moment capacity of the crane. MECHANICAL SPECIFICATIONS ELECTRIC – HYDRAULIC SPECIFICATIONS Hydraulic Boom Luffing: 0º to 58º with full load...