EZ-SYSTEMS BOOM EXTENDING HYDRAULIC DECK CRANE For over a decade the EZ-Systems Hydraulic Deck Crane has proven to provide the highest state-of-the-art yacht crane technology in an aesthetically pleasing design. The EZ-Systems hy- draulic deck crane is available in lifting capacities of up to ten-thousand pounds, and in stowed boom lengths starting at twelve-feet. Any of these cranes may be special-ordered built to MCA Mega Yacht Code / Classification Society compliance. This specification sheet describes our lar- ger cranes with lifting capacities of up to ten thousand pounds. EZ-7000-EXshown above. The EZ-System's telescoping aluminum boom is capable of being loaded to its full safe working load capacity in any position without restriction. The intelligent engineering inherent in this design allows distributed load-deflection across the boom during moments of dynamic loading, reducing the amount of shock-loading transmitted to the deck. Virtually silent-operating, our Hydraulic Lin- ear Winch system, a totally non-fouling winch design reflects the innovative and dependably safe operating characteristics built into the extending boom. This feature adds the additional element of operational safety as the winch travels with the boom during operation of the crane. This pre- vents any possibility of two-blocking the system causing damage to the cable. The crane features 360° hydraulic power rotation providing the ultimate in tender-handling convenience. The crane is remotely operated with a joy-stick operated proportional control on a removable pendant. Op- tionally, a wireless proportional control may be provided. A pedestal base is the typical mounting structure for the EZ-Systems crane. The EZ-7000-EX Crane is powered by a 15 Hp hydraulic power unit, optionally these cranes may be configured to take hydraulic supply from the ship's central hydraulic system. The EZ-Systems deck crane is finished to our highest standards. The aluminum structure is chromated and then primed with a two-part epoxy primer. Then the system is faired smooth, and then primed again. The crane is hand sanded, then moved into our heated finish booth where it is coated with a two-part AwlGRIP urethane spray-applied paint finish in a color of white to match your vessel. The crane system is assembled and installed onto one of our three dynamic load-testing centers where our quality assurance team dynamic load tests and in- spects every crane we produce prior to delivery to the customer. Excellence in Yachting Accessories North America Toll Free: (888) 541-6664 Email: [email protected] www.nautical-structures.com

DECK CRANE SYSTEM Pedestal bases may be cylindrical or pyramid in style, bolt-down or weld-down. The height of the pedestal base is variable. Bolt-down bases may have an external bolting flange. Please add an additional 4.0" /102 mm to the perimeter dimen- sions shown on this drawing for this feature. Crane boom lengths are per application. Please contact Nautical Structures for specific dimen- ANICAL SPECIFICATIONS Hydraulic Boom Luffing: 0° to 66° with full load capacity. 360° hydraulic power rotation. Hydraulic Linear Winch system. Rigged with Spectron 12 Plus composite fiber line, stainless...