EZ-2500–5000-EX HYDRAULIC DECK CRANE
2Pages

EZ-SYSTEMS BOOM EXTENDING HYDRAULIC DECK CRANE For over a decade the EZ-Systems Hydraulic Deck Crane has proven to provide the highest state-of-the-art yacht crane technology in an aesthetically pleasing design. The EZ-Systems hy- draulic deck crane is available in lifting capacities of up to ten-thousand pounds, and in stowed boom lengths starting at twelve-feet. Any of these cranes may be special-ordered built to MCA Mega Yacht Code / Classification Society compliance. This specification sheet describes our smaller cranes with lifting capacities of up to five thousand pounds. The EZ-System's telescoping aluminum boom is capable of being loaded to its full safe working load capacity in any position without restriction. The intelligent engineering inherent in this design allows distributed load-deflection across the boom during moments of dynamic loading, reducing the amount of shock-loading transmitted to the deck. Virtually silent-operating, our Hydraulic Lin- ear Winch system, a totally non-fouling winch design reflects the innovative and dependably safe operating characteristics built into the extending boom. This feature adds the additional element of operational safety as the winch travels with the boom during operation of the crane. This pre- vents any possibility of two-blocking the system causing damage to the cable. The crane features 360° hydraulic power rotation providing the ultimate in tender-handling convenience. The crane is remotely operated with a joy-stick operated proportional control on a removable pendant. Op- tionally, a wireless proportional control may be provided. A pedestal base is the typical mounting structure for the EZ-Systems crane, although a standpipe mount may also be used in some appli- cations. The EZ-Systems Crane is powered by a hydraulic power unit, available in various horse- power configurations. The EZ-Systems crane is finished to our highest standards. The aluminum structure is chromated and then primed with a two-part epoxy primer. Then the system is faired smooth, and then primed again. The crane is hand sanded, then moved into our heated finish booth where it is coated with a two-part AwlGRIP urethane spray-applied paint finish in a color of white to match your vessel. The crane system is assembled and installed onto one of our three dynamic load-testing centers where our quality assurance team dynamic load tests and inspects every crane we produce prior to delivery to the customer. Excellence in Yachting Accessories North America Toll Free: (888) 541-6664 Email: sales@nautical-structures.com www.nautical-structures.com

DECK CRANE SYSTEM Pedestal bases may be cylindrical or pyramid in style, bolt-down or weld-down. The height of the pedestal base is variable. Bolt-down bases may have an external bolting flange. Please add additional 3.0" / 76 mm to the perimeter dime sions shown on this drawing for this feature. Floating-Flange standpipe mounting is avail Standpipe diameters will vary depending on actual moment capacity of the crane. The crane's stowed length and boom exten- sion's telescoping length may be varied to accommodate the vessel's requirements. The most common configurations are de- picted on...