EURO-1700-3-126 HYDRAULIC DAVIT EURO - HYDRAULIC DAVIT SYSTEM Nautical Structures’ EURO-1700-3 Hydraulic davit system represent the current state of the art in tender-handling equipment. Compare the features of this small crane against any other and you will find the performance and value of this equipment unsurpassed. The crane features a generous ten-and-a-half-foot boom, capable of being loaded to its full safe working load capacity in any position without restriction. Operational safety is the prime focus in our engineered design. Virtually silent-operating, our Hydraulic Linear Winch, a totally non-fouling winch system reflects the innovation and inherent safe operating characteristics built into this crane system. The hydraulic deck crane is powered by a remotely mounted one-horsepower hydraulic power unit. Aluminum hydraulic cylinders with integrated counter-balance locking valves, standard in all EURO-Systems cranes, actuate each function for unsurpassed corrosion resistance, power and dependability. The EURO-Systems crane features 360º hydraulic power rotation providing the ultimate in tender-handling convenience. A pedestal base is the typical mounting structure for the EURO -Systems crane, although a standpipe mount may also be used in many applications. The deck crane is finished to our highest standards. The aluminum structure is etched and then primed with a two-part epoxy primer. The system is faired smooth, and then primed again. The davit is hand sanded, and then moved into our heated finish booth where it is coated with a two-part AwlGRIP urethane spray-applied paint finish in a color of white to match your vessel. The crane system is assembled and then moved onto our dynamic load-testing center where our quality assurance department load tests every davit and crane we produce prior to delivery to the customer. 10351 72nd Street North • Largo, Florida 33777 • Phone: (727) 541-6664 Facsimile: (727) 541-6353 North America Toll Free: (888) 541-6664 Email: [email protected] www.nautical-structures.com

EURO-1700-3-126 HYDRAULIC DAVIT Pedestal bases may be cylindrical or pyramid in style, bolt-down or weld-down. Bolt-down bases may have an external bolting flange. Please add an additional 3.0” / 76 mm to the perimeter dimensions shown on this drawing for this feature. Standpipe mounting is available. Standpipe diameters: 17,850 ft/lb.: 5.0“ / 127 mm 20,400 ft/lb.: 5.0“ / 127 mm A 144” / 365cm Boom Length model is available as a special order item. 20° 35° 65° 45° 55° 10.00 21.75 1.0M 34.75 1M 12.0 13.0 Ø16.00 126.0 142.0 17.0 Aft Rotation Clearance 24.0 MECHANICAL SPECIFICATIONS Hydraulic Boom...