EURO-1200-2-HYDRAULIC DAVIT EURO-1700-2-HYDRAULIC DAVIT EURO - SYSTEMS HYDRAULIC DAVIT Nautical Structures’ EURO-1200-2 and EURO-1700-2 Hydraulic Davit Systems represent the current state of the art in hydraulic yacht davit systems. Compare the features of this davit against any other and you will find the performance and value of this equipment unsurpassed. The davit features a generous ten-and-a-half foot-long boom that is capable of being fully loaded to its full safe working load capacity in any position without restriction. The enhanced lifting capacity is more than adequate to safely handle the newest four-stroke personal watercrafts. With operational safety being our prime focus, the EURO-Systems davit features our silent operating Hydraulic Linear Winch system, a totally non-fouling winch design. The hydraulic davit is powered by an integral one-horsepower hydraulic power unit. Aluminum hydraulic cylinders with integrated locking-valves is standard in all EUROSystems davits actuating each function with unsurpassed corrosion resistance, power and dependability. The EURO-Systems Davit rotates easily by hand on steel roller bearings. Hydraulic power rotation may be selected as an optional feature to enhance the davit‘s operating convenience. A through-deck standpipe is the typical mounting structure for the EURO-Systems Davit, although a pedestal base mount may also be used in some applications. The EURO Davit System is finished to our very highest standards. The aluminum structure is etched and then primed with a two-part epoxy primer. Then the system is faired, and then primed again. The davit is hand sanded, and then moved into our heated finish booth where it is coated with a two-part AwlGRIP urethane spray-applied paint finish in a color of white to match your vessel. The davit system is assembled and then moved onto our dynamic load-testing center where our quality assurance department load tests every davit we produce prior to delivery to the customer. MCA-LY2 certification is available upon request. 10351 72nd Street North • Largo, Florida 33777 • Phone: (727) 541-6664 Facsimile: (727) 541-6353 North America Toll Free: (888) 541-6664 Email: [email protected] www.nautical-structures.com

EURO-1200-2-HYDRAULIC DAVIT EURO-1700-2-HYDRAULIC DAVIT Pedestal base mounting is available. Pedestals may be cylindrical or pyramid in style, bolt -down or weld-down in configuration. 20° 30° 45° 55° 66° 9.00 1M 31.50 1M 12.0 12.0 5.0 OD - EZ-1200 5.0 OD - EZ-1700 126.0 142.0 Trim To Fit 17.0 Aft Rotation Clearance Ø8.50 MECHANICAL SPECIFICATIONS Hydraulic Boom Luffing from 0º through 66º. Reach (Maximum at 0º position): 123” / 312 cm Reach (Minimum at 65º position): 46.0” / 116 cm Aft rotation clearance: 17” / 43 cm Manual rotation on roller bearings: 360º Optional 180º or 360º hydraulic rotating...