*mynauticexpo

EURO Series-3

1 / 2 PagesView full catalog

EURO Series-3

Product catalog summary

Specifications:

Maximum Safe Working Load (SWL) capacities are available in 2,000lb (907kg), 2,200lb (997kg), and 2,500lb (1134kg) at any boom position without restriction.
The crane features flush access panels for easy maintenance.
It includes a non-fouling hydraulic linear winch with self-limiting travel, two-block protection, self-locking load holding capabilities, and automatic lift overload protection.
The crane is operated via a handheld, waterproof, UV-stabilized 2-speed hi/lo controller with tether and weatherproof mil-spec connectors. Optional wireless joystick-operated proportional remote controls are available.
High-pressure aluminum hydraulic cylinders provide corrosion resistance, dependability, and reduced weight.
The crane offers 359º hydraulic power rotation/slew for superior tender-handling control.
An aluminum deck-mounted pedestal base is standard, available in cylindrical or pyramid styles, bolt-down or weld-down. A through-deck mount standpipe/compression post is also available.
The hydraulic davit is powered by a remotely mounted 5-hp hydraulic power unit, with an optional ship’s central hydraulics interface kit.
Composite high-load bushings at stainless load pin to aluminum contact points prevent hole deformation and dissimilar metals corrosion.
The system is finished with urethane paint products in standard colors: Snow White, Off White, and Matterhorn White. Other colors are special order.
The davit is assembled and dynamic load tested prior to shipment.
A 12-month limited warranty covers hydraulics, electrical, and labor.

Mechanical Specifications:

Hydraulic Boom Luffing is available in 144in and 168in booms with varying reach capabilities at different positions.
Aft rotation clearance is 19in (48cm).
The hydraulic linear winch system is rigged 6:1 with stainless steel wire rope, weight, and safety snap hook.
Cable pay-out is 21ft (6.40m).
System weights vary by model, with pedestal base weighing 70lb (32kg).

Electric-Hydraulic Specifications:

Power supply options include 115V AC, 60 Hz, 1 Ph. on a 25 amp breaker, and 230V AC, 60 Hz, 1 Ph. on a 20 amp breaker, with an optional 230V AC, 50 Hz configuration.
A 2-speed (high/low) waterproof delrin remote control switch is wired to a 20’ (6.1m) removable pendant. Joystick-operated proportional control is optional.
The hydraulic power unit (HPU) is 3.5 Hp, 3000 psi / 203 bar, with a 1.0 gpm / 3.8 lpm output. Fluid type is AW-68, ISO quality 17/15/12.

Rated Capacity:

EURO-2200-3-144: 2,200lb (1000kg)
EURO-2000-3-168: 2,000lb (909kg)
EURO-2500-3-144: 2,500lb (1136kg)
Maximum moment capacity is 30,000 foot/pounds.

Additional Features:

Pedestal bases can be cylindrical or pyramid in style, bolt-down or weld-down, with an external bolting flange option.
Standpipe mounting is available with diameters for 24,000 ft/lb. and 30,000 ft/lb. Average standpipe weight is 300 lb. (136 kg).

Catalog excerpts

EURO Series-3 Hydraulic Davit 2000/2200/2500lb-144/168in 907/998/1134kg-366/426.72cm EURO 2000/2200/2500 Hydraulic Deck Crane Systems Maximum SWL capacities available in 2,000lb / 907kg, 2,200 lb/ 997kg & 2,500lb / 1134kg at any boom position without restriction. Flush access panels are appropriately located for easy maintenance. A non-fouling Hydraulic linear winch design with self-limiting travel, two-block protection, selflocking load holding capabilities and automatic lift overload protection for safe, dependable and quiet cable payout & retrieval. The crane is operated from a hand held, waterproof, UV stabilized 2-speed hi/lo controller with tether and weatherproof mil-spec connectors. Optional wireless joystick operated proportional remote controls are available. High pressure aluminum hydraulic cylinders actuate each function for unsurpassed corrosion resistance, dependability and reduced weight. Hydraulic power rotation/slew, 359º providing the superior tender-handling control. An aluminum deck mounted pedestal base is the standard mounting structure. Pedestal bases are offered in a cylindrical or pyramid style, bolt down or weld down. Also available is a through deck mount standpipe/compression post. The hydraulic davit is powered by a remotely mounted 5-hp hydraulic power unit for enhance performance and reliability. Also available is our ship’s central hydraulics interface kit. Composite high load bushings at stainless load pin to aluminum contact points to prevent hole deformation and dissimilar metals corrosion. System is finished to our Nautical Structures high level of quality with urethane paint products. Our standard colors are Snow White, Off White & Matterhorn White. All other colors will be special order and quoted upon request. Davit is assembled and dynamic load tested prior to shipment. 12 Month Limited Warranty: HYDRAULICS, ELECTRICAL AND LABOR IS INCLUDED (see attached warranty for details).

Open the catalog to page 1

EURO Series-3 Hydraulic Davit 2000/2200/2500lb-144in 907/998/1134kg-366cm Pedestal bases may be cylindrical or pyramid in style, bolt-down or weld-down. Bolt-down bases may have an external bolting flange. Please add an additional 3.0” / 76 mm to the perimeter dimensions shown on this drawing for this feature. Standpipe mounting is available. Standpipe diameters: 24,000 ft/lb.: 6.0“ / 153 mm 30,000 ft/lb.: 8.0“ / 204 mm Average standpipe weight is 300 Lb. / 136 Kg. MECHANICAL SPECIFICATIONS Hydraulic Boom Luffing: Inch / Centimeter Inch / Centimeter Reach (Maximum at 0º position):142in/360cm...

Open the catalog to page 2

EURO Series-3

EURO Series-3

Catalog excerpts

All Nautical Structures catalogs and brochures

Archived catalogs