marine carpentry in aluminum

Akes 19 | open Akes 19 | open Akes 19 is a new open alloy boat with great rough sea capabilites and good comfort also requiring low power to have good performances. The hull, derived from bigger Akes models, has been designed for 40/60 hp engines or 70 hp. Akes 19 planes at very low speed with very low trim angle, at very low revs and without need to “push” on the throttle; this allows to ride with big load with poor decreasing of performance in any conditions, and otherwise without necessity of bigger and expensive engines. A stable hull, transverse and longitudinally, that allow to come back...

“The hull is fully welded with double pulsed arc welder “weco power pulse” , with continuous alloy thread ALM G 5. Accessories are fixed and bolted with inox screws 316 A 4 (Uni etc etc etc), fully enclosed with teflon topping or tixotropic sealant 1k , to complese insulate aluminum from steel. Technical Specifications Material: marine grade alloy 5083 H111 6 - 8 - 15 mm thickness Lenght: 5.7 m Beam: 6.30 m Width: 2.05 m Dry weight: 430 kg Draft: 0.3 m Hull: deep V with variable deadrise Engine: recommendede 40/60 or 40/70 cv Max speed: 35 MPH Design category CE: C Max load: 6 persons Self bailing...

OPTIONAL Bow table Teak deck or flexiteek Big stern prolongues Shower system with 55l tank, inlet cap, vent and pump Stereo hi-fi with speakers Cooler/freezer Sumbrella bimini Fender Handles on consolle Fuel tank 95 lt in crosslinked plastics, inlet cap, vent and indicator Compass built-in storage Hatch in consolle Hull colours Navigation lights Horn Entire boat cloth cover Helm cushion on bolster Raised footrest consolle Cloth cover Anchor Rope and chain with anchor Bow sundress upholstery Bow sundress prolongue with upholstery marine carpentry in aluminum Cancelli Cesare Carpenteria metallica...