• Model: T8V.370
• Power: 272 kW (370 hp) at 3800 rpm
• Displacement: 4.5 liters (275 in³)
• Configuration: 8 cylinders, V design 90°
• Operation Type: 4 stroke Diesel
• Bore & Stroke: 86 x 96 mm (3.39 x 3.78 in)
• Compression Ratio: 15.8:1
• Peak Torque: 804.3 Nm at 2600 rpm
• Dry Weight: 435 kg (959 lbs)
• Fuel System: Direct injection, High pressure Common Rail, Electronically controlled
• Air Intake: Twin turbocharger
• Cooling System: Closed cooling with heat exchanger
• Alternator: 12 Volt, 120 Amp
• Emission Compliance: EPA marine Tier 3, RCD2 2013/53/EU

• 8 cylinders V design 90°
• 4 valves per cylinder
• Dual overhead camshafts (DOHC)
• Watercooled exhaust manifold
• Internal balancers

• Common Rail fuel injection system
• Fuel filter with hand primer
• Integrated fuel cooler

• Replaceable full-flow oil filter
• Oil dipstick
• Transmission oil cooler

• Closed cooling with heat exchanger
• Gear driven self-priming raw water pump
• Coolant circulating pump
• Water cooled exhaust elbow

• 12V 120A alternator
• 12V Electrical system
• Complete instrumentation including key switch and alarms
• Extension cable harness with plug-in connection

• Twin turbocharger
• Intercooler

• Flexible engine mounting

• Complete marine propulsion systems
• Marine transmission adaptation kits
• Throttle and shift controls
• Additional instrumentation, Flying bridge extension harness
• Complete fuel systems
• Complete exhaust systems

• Up to 500 annual operating hours
• Load factor up to 35%
• Full power for no more than 30 minutes out of each 8 hours of operation. The remaining operation time must be at or below cruising speed

Contact your local dealer for more details and availability for transmission model and type.

Includes power at crankshaft, power at calculated propeller load, and torque at crankshaft. Fuel consumption data is also provided.

Nanni Industries S.A.S. France
11, Avenue Mariotte - Zone Industrielle
33260 La Teste - France
Tel: +33 (0)5 56 22 30 60
Fax: +33 (0)5 56 22 30 79

Nanni Trading S.R.L.
Via Degli Olmetti, 5/B
00060 Formello (RM) - Italia
Tel: +39 06 30 88 42 51/52/53
Fax: +39 06 30 88 42 54

Technical data according to ISO 8665. Specifications are subject to change without notice. Images and illustrations may show non-standard equipment. All combinations of equipment & accessory are not available.