Catalogs >
Nanni Industries >
Product Guide Nanni

Product Guide Nanni
54Pages

Catalog excerpts

PRODUCT GUIDE ENERGY CREATOR - SINCE 1952 - www.nannidiesel.com

Nanni power systems With a range of high quality propulsion engines and generator sets, Nanni is able to provide complete power systems for marine applications. This product selection guide includes a comprehensive range of propulsion engines from 10 to 760 hp, and marine generator sets from 6 to 500 kW. This guide is intended to provide an overview of our product range while helping the prospective buyer to select the appropriate Nanni product.

Open the catalog to page 2

Despite all the care taken in publishing this brochure, Nanni Industries cannot be held responsible for any error introduced in the content. In the interest of progress, please kindly note that model designations, ratings and specifications are subject to change without prior notice. General l Product Guide l 01

Open the catalog to page 3

Nanni at a glance Nanni is an independent international company founded in 1952 and is now France’s leading marine engine manufacturer. The company designs, develops, manufactures and markets engines and generator sets designed specifically for the challenge of marine applications. Nanni also provides all related technologies, including fuel systems, controls, air handling, filtration, emission solutions and electrical power generation systems. With its comprehensive product range, Nanni offers content in all power and application categories, and is able to provide a full range of...

Open the catalog to page 4

Sail with confidence Nanni has been a global marine engine manufacturer for over 60 years, offering customers industry-leading durability and reliability. As a result, many of Nanni’s legacy engines are still powering boats around the globe. Known for their reliability, its products are the driving force behind many power systems worldwide. The long and successful partnership with customers including major shipyards and governmental agencies provides further evidence that you can rely on a solid partner. Robust, efficient & built to last. These are the qualities that have made Nanni’s...

Open the catalog to page 5

Using this guide Propulsion engines For propulsion engines, the application ratings reflect various boat operation needs. Knowledge of the engine’s operating requirements is therefore essential to establish a proper match of engine rating to boat operating requirements. Consider the expected annual operating hours based on the a 12-month period. Also consider the duty cycle, which refer to the amount of time the engine is required to be operated at rated rpm during a period of time. Then review the presented application ratings and decide which rating best defines the application. Also...

Open the catalog to page 6

Dimensions & Weight Dimensions and weight may vary according to the configuration selected. More detailed information is included within the specific installation schematic for each product. Stated weight values are based on dry engines including standard equipment without coolant, oil and transmission. Sizing is defined according to the following schematic diagram: Length clutch For propulsion engines, performance data are provided in accordance with ISO 8665-1, as follows: kW: Rated engine power in kilowatts Rated engine power in metric horsepower rpm: Rated engine speed in...

Open the catalog to page 7

For an exact determination of the appropriate rating, contact your local Nanni representative. 06 l Product Guide l General

Open the catalog to page 8

1 Load factor: fuel burned over a period of time divided by the full-power fuel consumption over the same period. 2 Duty cycle: the remaining operation time must be at or below cruising speeds. Cruising speed is at least 200 rpm below the rated engine speed. No wide-open throttle below rated engine speed. General l Product Guide l 07

Open the catalog to page 9

Exhaust emissions IMO-MARPOL Annex VI Main international convention concerning the prevention of marine environment pollution by shipping. Only applies to diesel engines above 130 kW. EU-Directive 2013/53/EU (RCD 2) European Union design regulations for recreational craft up to a hull length of 24 m. EU-Directive 97/68/EC (NRMM) as amended The Nonroad Mobile Machinery Directive regulates exhaust emissions from marine propulsion and auxiliary engines used aboard inland waterway vessels operating in the European Community. EPA marine Tier 3 Managed by the Environmental Protection Agency of...

Open the catalog to page 10

Classification Society Nanni works with various marine classification societies to allow the use of our engines in vessels designed and built to a society’s particular requirements. For more information, please contact your local Nanni representative. SOLAS The SOLAS (Safety Of Life At Sea) is an international treaty that prescribes several rules regarding the safety of ships. Our SOLAS approved engines are designed and manufactured to meet these regulations for use in life, rescue and crew tender boats. Special features do include: Immediate starting in very low temperatures (down to...

Open the catalog to page 11

The references indicated hereafter identify the regulations each propulsion engine will be certified to: 1. IMO MARPOL Annex VI compliant Rated Power Emissions Engine [hp] Rating level Page 10 l Product Guide l Propulsion engines

Open the catalog to page 12

Rated Power Emissions Engine [hp] Rating level Page Propulsion engines l Product Guide l 11

Open the catalog to page 13

Available for engines up to 60 hp, the Sail Drive transmission system provides to both the OEM manufacturer and boat owners a unique, still proven design. It offers quiet and virtually vibration free operation, with very low water resistance under sail, plus increased propulsion efficiency due to the thrust direction being parallel to the boat's waterline. Features & Benefits ■ Installation and service made easy in comparison to conventional inboard shaft drive installations, ■ Forced lubrication system, integrated oil cooling system, ■ Structure made of high strength aluminium alloy with...

Open the catalog to page 14

Propulsion engines l Product Guide l 13

Open the catalog to page 15

N2.10Propulsion Shaft Line Sail Drive Configuration Fuel system Displacement Bore & Stroke Intake Cooling Gearbox Emissions 2 cylinders in line 4 stroke Diesel Mechanical Indirect (E-TVCS) 0.479 l [29.2 in] 67 x 68 mm [2.64 x 2.68 in] Naturally aspirated Closed cooling with heat exchanger Keel Cooling (optional) Shaft line or Sail Drive RCD2 2013/53/EU, EPA marine Tier 3, BSO 2 Max length Length clutch Width Height Dry weight ■ Class-leading package size & Weight ■ Installation flexibility ■ Repowering made easy ■ Low installation costs Features & Benefits Kubota engine base Low rated...

Open the catalog to page 16