*mynauticexpo

N6.200

1 / 2 PagesView full catalog

N6.200

Product catalog summary

Specifications

Power: 149 kW (203 hp) at 2500 rpm
Displacement: 6.8 liters (414 in³)
Configuration: 6 cylinders in line
Operation Type: 4 stroke Diesel
Bore & Stroke: 106.4 x 127 mm (4.19 x 5 in)
Compression Ratio: 17.0:1
Peak Torque: 695 Nm at 1800 rpm
Dry Weight: 735 kg (1620 lb)
Fuel System: Direct injection with mechanical governor
Air Intake: Turbocharged
Cooling: Closed cooling with heat exchanger
Alternator: 24 Volt, 50 Amp

Technical Description

Engine Block: Replaceable wet-type cylinder liners, water-cooled exhaust manifold
Fuel System: Includes fuel filter and direct injection
Lubrication System: Replaceable full-flow oil filter, oil dipstick, oil cooler
Cooling System: Gear driven self-priming raw water pump, coolant circulating pump
Electrical System: 24V 50A alternator, 24 Volt starter motor, complete instrumentation
Air Intake: Turbocharged
Other Features: Flywheel SAE 3, flexible engine mounting, damper pulley

Optional Equipment & Accessories

Keel cooling adaptation
Dry exhaust elbow
Complete marine propulsion systems
Marine transmission adaptation kits
Throttle and shift controls
Additional instrumentation, flying bridge extension harness
Rigid engine mounting
Power take off
Type approval

Rating

Up to 4000 annual operating hours
Load factor up to 50%
Full power for no more than 4 hours out of each 12 hours of operation

Performance Curves

Power at crankshaft ranges from 30 to 210 hp between 1000 and 2250 rpm
Torque at crankshaft ranges from 350 to 700 Nm between 1000 and 2250 rpm
Fuel consumption ranges from 6 to 42 l/h between 1000 and 2250 rpm

Contact Information

Nanni Industries S.A.S. France: Tel: +33 (0)5 56 22 30 60
Nanni Trading S.R.L Italy: Tel: +39 (0)6 30 88 42 51/52/53

Catalog excerpts

Propulsion engine Engine base John Deere Fuel system Direct injection Mechanical governor 6 cylinders in line Air intake Operation type Cooling Bore & Stroke 4 stroke Diesel Closed cooling with heat exchanger Compression ratio Rated speed Idle speed Peak torque 9° Front up 0° Front down Peak torque speed Dry weight Find a Nanni dealer near you on

Open the catalog to page 1

N6.200 149 kW [203 hp] @ 2500 rpm TECHNICAL DESCRIPTION Engine block s Replaceable wet-type cylinder liners s Watercooled exhaust manifold Fuel system s Fuel filter s Direct injection, mechanical governor Lubrication system s Replaceable full-flow oil filter s Oil dipstick s Oil cooler Cooling system s Closed cooling with heat exchanger s Gear driven self-priming raw water pump s Coolant circulating pump s Water cooled exhaust elbow Electrical system & Instrumentation s 24V 50A alternator s 24 Volt starter motor s Complete instrumentation including key switch and alarms s Extension cable harness...

Open the catalog to page 2

All Nanni Industries catalogs and brochures

T4.205
2 Pages
N4.38
2 Pages
N3.30
2 Pages
N2.10
2 Pages
catalog
104 Pages

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list