*mynauticexpo

N5.150

1 / 2 PagesView full catalog

N5.150

Product catalog summary

Specifications

Power: 112 kW (152 hp) at 2600 rpm
Displacement: 4.5 liters (276 in³)
Configuration: 4 cylinders in line
Operation Type: 4 stroke Diesel
Bore & Stroke: 106.4 x 127 mm (4.19 x 5 in)
Compression Ratio: 17.2:1
Torque: 507 Nm at 1800 rpm
Weight: 462 kg (1018 lb)
Fuel System: Direct injection with mechanical governor
Air Intake: Turbocharged
Cooling: Closed cooling with heat exchanger
Alternator: 24 Volt, 50 Amp

Technical Description

Engine Block: Replaceable wet-type cylinder liners, water-cooled exhaust manifold
Fuel System: Includes fuel filter and direct injection
Lubrication System: Features replaceable full-flow oil filter, oil dipstick, and oil cooler
Cooling System: Closed cooling with gear-driven self-priming raw water pump
Electrical System: 24V 50A alternator, 24 Volt starter motor, complete instrumentation
Air Intake: Turbocharged
Other Features: Flywheel SAE 3, flexible engine mounting, internal balancers

Optional Equipment & Accessories

Keel cooling adaptation
Dry exhaust elbow
Complete marine propulsion systems
Marine transmission adaptation kits
Throttle and shift controls
Additional instrumentation, flying bridge extension harness
Rigid engine mounting
Power take off
Type approval

Rating

Up to 3000 annual operating hours
Load factor up to 40%
Full power for no more than 1 hour out of each 12 hours of operation

Performance Curves

Power and torque curves are provided for various RPMs
Fuel consumption data is available for calculated propeller load

Contact Information

Nanni Industries S.A.S. France
Nanni Trading S.R.L, Italy

Technical data according to ISO 8665. Specifications are subject to change without notice.

Catalog excerpts

Propulsion engine Engine base John Deere Fuel system Direct injection Mechanical governor 4 cylinders in line Air intake Operation type Cooling Bore & Stroke 4 stroke Diesel Closed cooling with heat exchanger Compression ratio Rated speed Idle speed Peak torque 12° Front up 0° Front down Peak torque speed Dry weight Find a Nanni dealer near you on

Open the catalog to page 1

N5.150 112 kW [152 hp] @ 2600 rpm TECHNICAL DESCRIPTION Engine block s Replaceable wet-type cylinder liners s Watercooled exhaust manifold Fuel system s Fuel filter s Direct injection, mechanical governor Lubrication system s Replaceable full-flow oil filter s Oil dipstick s Oil cooler Cooling system s Closed cooling with heat exchanger s Gear driven self-priming raw water pump s Coolant circulating pump s Water cooled exhaust elbow Electrical system & Instrumentation s 24V 50A alternator s 24 Volt starter motor s Complete instrumentation including key switch and alarms s Extension cable harness...

Open the catalog to page 2

All Nanni Industries catalogs and brochures

T4.205
2 Pages
N4.38
2 Pages
N3.30
2 Pages
N2.10
2 Pages
catalog
104 Pages

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list