NAISH WINDSURFING 2019
44Pages

“Measured in the seconds shooting through an epic barrel; in the minutes shaved off your fastest downwinder; or in the hours taken to finally pull off the next big trick—no matter how diverse, how thrilling, or how fleeting, each significant experience comes down to one unforgettable moment. Whatever the reason, whatever the impulse, wherever the water takes you…this is your moment. Make it extraordinary.”

WINDSURF FOILS / AT-A GLANCE STEALTH STRIPES STAY UNDER THE RADAR THRUST WINDSURF FOIL COMPLETE —STANDARD THRUST WINDSURF FOIL COMPLETE —ABRACADABRA THRUST WINDSURF FOIL COMPLETE —DEEP TUTTLE ALL-AROUND FREERIDE FOIL ALL-AROUND FREERIDE FOIL ALL-AROUND FREERIDE FOIL Pages: 8-9 Front Wing Design: Modified Delta Foil Front Wing Performance Characteristics: High Lift Standard Mast Length: 70 cm/Aluminum Fuselage Length: 64.2 cm Pages: 10-11 Front Wing Design: Modified Delta Foil Front Wing Performance Characteristics: High Lift Standard Mast Length: 70 cm/Aluminum Fuselage Length: 64.2 cm...

Thrust Spare Parts Thrust Spare Parts & Accessories Thrust Accessories 2018 Thrust Complete Assembly Screw Set Foil Cover 2019 Thrust Complete Assembly Screw Set Mast Cover Board Mount Screw Set Standard Plate Travel Bag (Does not include internal foam pieces) Board Mount for Aluminum Mast– Standard Plate Board Mount for Aluminum Mast– Abracadabra Plate Board Mount Screw Set Abracadabra Plate FOILS / SPARE PARTS & ACCESSORIES Thrust Windsurf Wings (Does not include internal foam pieces) SPARE PARTS & ACCESSORIES Board Mount for Aluminum Mast– Tuttle 5-Foot Foil Leash Board Mount for...

ASSEMBLY DIAGRAM (3) M6 30 mm Mast Screws Attaching Standard or Abracadabra Plate to the Board Abracadabra Plate B) ATTACH THE MAIN FOIL (FRONT WING): Keeping the fuselage turned bottom up, position the front wing (with logo down) to the indexed scarf joint. Thread the 25 mm center screw (blue) until hand tight. Do the same with the other two screws. Tuttle/ Deep Tuttle C) ATTACH THE PLATE TO THE MAST: Using the (3) 30 mm screws, tighten beginning with the center screw first, then the front and finally the back screw. (Note: Abracadabra, Standard, and Deep Tuttle plates are available as...

DETAIL PHOTOS Easy jibing and other maneuvers are another advantage of the Thrust WS setup. The delta front wing works in tandem with the vertical stabilizer of the back wing to deliver easy control when turning. The front wing provides lift at low speeds making it much easier to cruise through a jibe without coming off the foil. While high aspect foils require the board to plane first, the Thrust WS setup engages the foil, lifting you up even when the board has not reached full planing. The Thrust Windsurf foil setup offers the earliest foiling in the lightest winds, maximum control at any...

DETAIL PHOTOS Easy jibing and other maneuvers are another advantage of the Thrust WS setup. The delta front wing works in tandem with the vertical stabilizer of the back wing to deliver easy control when turning. The front wing provides lift at low speeds making it much easier to cruise through a jibe without coming off the foil. While high aspect foils require the board to plane first, the Thrust WS setup engages the foil, lifting you up even when the board has not reached full planing. The Thrust Windsurf foil setup offers the earliest foiling in the lightest winds, maximum control at any...

DETAIL PHOTOS Easy jibing and other maneuvers are another advantage of the Thrust WS setup. The delta front wing works in tandem with the vertical stabilizer of the back wing to deliver easy control when turning. The front wing provides lift at low speeds making it much easier to cruise through a jibe without coming off the foil. While high aspect foils require the board to plane first, the Thrust WS setup engages the foil, lifting you up even when the board has not reached full planing. The Thrust Windsurf foil setup offers the earliest foiling in the lightest winds, maximum control at any...

HOVER FOILBOARDS / AT-A-GLANCE DEDICATED WINDSURF FOILING DEDICATED WINDSURF FOILING SUP/WINDSURF FOILING SUP/WINDSURF FOILING HOVER FOILBOARDS AT-A-GLANCE

YXOPE FRUS revoH & PUS revoH HOVER 122 & 142 DEDICATED WINDSURF FOILING A. Graphic Sanded Finish & Full Biax Glass Wrap B. S-glass Wrap = Lightweight + impact strength + balanced flex C. Triangular Glass Reinforcement = Impact resistance D. Full PVC Wrap Deck & Bottom = Impact resistance INTERNAL CONSTRUCTION HOVER CROSSOVER 120 & 150 SUP & WS-FOILING A. (2) 10” US box foil system laminated into 3. Full PVC Wrap (Deck & Rail) C. Additional glass reinforcement D. Horizontal PVC cover layer INTERNAL CONSTRUCTION FOIL MOUNT DETAIL B. (2) High density PVC blocks FOIL MOUNT DETAIL 1. Deck to...

DETAIL PHOTOS For a customized experience, our track system allows riders to fine-tune the foil position to fit their size and ability: adjusting the foil in a more forward position suits heavier, or more inexperienced foilers, while positioning the foil further back suits lighter, or more experienced riders. Light and lively with plenty of room to “self-tweak”, the Hover 122 and 142 are the must-try foilboards for sailors of any skill level. 1. Graphic Sanded Finish & Full Biax Glass Wrap 2. S-glass Wrap = Lightweight + impact strength + balanced flex 12 3. Triangular Glass Reinforcement =...

DETAIL PHOTOS Short, wide and unbelievably stable, the Hover 120 is as accessible as it is versatile. Featuring a huge sweet spot for a board of its length, this board is a great choice for beginner foilers, while those more experienced can position the foil further back for greater maneuverability. Easily fitting riders of all sizes, the Hover 120 Surf/Windsurf foilboard is the ultimate choice for any waterman that loves to do it all. These boards come with standard FCS fins and are equipped with the FCS II Eco Fin System for riders who prefer to use tool-less fins from FCS. 2. Glass Layer...