12 M26.2 Generator


Catalog excerpts

12 M26.2 Generator - 1

12 M26.2 Marine Generator Set Model Customer benefits Genuine marine design with simple solutions, easy routine maintenance, engine block inspection hatches Global environment care with low exhaust emissions and controlled fuel consumption at any running cycle Simple technology with mechanical injection Life cycle cost efficiency with extended mean time between overhauls (MBTO) Power definition Standard ISO 3046/1 - 1995 (F) Reference conditions Ambient temperature 25 °C / 77 °F Fuel oil Relative density Lower calorific power Consumption tolerances Air inlet limit temperature Emissions IMO Tier II Prime running power (PRP) • Variable load with mean power calculated on 250 running hours • No restriction on use if mean power >75% of nominal power • Total operating time at 100% nominal power shall not exceed 500 hours per year • 10% overload available 1 hour each 12 hours 0,840 ± 0,005 42 700 kJ/kg ± 5 % 35 °C / 95 °F POWER YOUR SUCCESS

Open the catalog to page 1
12 M26.2 Generator - 2

Standard equipment Engine and block Cast iron cylinder block, with replaceable cylinder liners Separate cast iron cylinder heads Replaceable valves guides and seats Steel forged crankshaft with 7 bearings Light alloy piston with 3 high performance piston rings Cooling system Fresh / raw water heat exchanger with integrated thermostatic valves and expansion tank Cast iron centrifugal fresh water pump, mechanically driven Bronze self-priming raw water pump, mechanically driven Lubrification system Full flow screwable oil filters Fresh water cooled lube oil cooler Fuel System In line injection...

Open the catalog to page 2

All Moteurs Baudouin catalogs and brochures

  1. IR2S Gearbox

    2 Pages

  2. IR4N Gearbox

    2 Pages