Dual Gigabit Ethernet Media Converter Description Typical Applications • Remotely Operated Vehicles (ROVs) and Tether Management Systems • Pipe Inspection Robots • Bomb Disposal Robots • Video Security Systems • Tactical Networks and Defense Systems • Industrial Process Control • Two independent (switchless) 10/100/1000 Base-T(X) Ethernet links • Single optical transceiver running with 2500, 1250 or 625 Mbaud optical link (switch settable) • Interchangeable SFP transceivers • Rugged design for harsh environments, including pressure tolerant version • Compatible with 907-DIAG-E diagnostic card and Graphic User Interface (GUI) software The model 907-GBE2 is a Dual Gigabit Ethernet (GbE) Media Converter. This PC/104 card offers two independent 10/100/1000 Base-T(X) Ethernet ports (RJ-45) while maintaining the use of a single optical transceiver. This is the ideal solution for multi-beam sonar devices running “dual head” configurations, or any application that requires simultaneous yet dedicated point-to-point “switchless” connections over fiber. The 907-GBE2 may be used as a standalone card or optically integrated into a 907 system stack via CWDM modules. Optical power budgets are typically 20 - 26 dB over 10 km of singlemode fiber. Enhanced diagnostics are provided by on-board LEDs and through a dedicated Ethernet link when used with the diagnostics card (907-DIAG-E) and corresponding graphical user interface (GUI) software. Market Specific • Reduces cost and size by replacing two GbE media converters with a single card and single optical transceiver • Switchless design provides low latency and compatibility with non-standard packets often used by sonars and other proprietary data link • Supports operation over multimode fiber with lower optical rate settings • Supports a wide range of optical options, including CWDM wavelengths and multimode configurations • Simplifies troubleshooting with advanced diagnostics Moog Components Group

Model 907 Datasheet Data Diagnostics 2 (non-switched, independent) Data Rates Total Throughput ~ 500/1000/2000 Mbps, via switch setting (0.01% used for embedded diagnostics) Diagnostics from remote and console through 907-DIAG-E card at console < 25 us (not including fiber, ~5 μs/km) Standalone version; support for jumbo frames. Contact Moog for details. Custom enclosures Baud Rate AME-EP (Moog proprietary) 1310/1550 nm standard (CWDM optional, 1471 - 1611 nm) Flux Budget Power (electrical), optical link, optical fault, optical speed, PHY Rx/Tx activity, port rate Optical Fiber Bidi (bidirectional)...