Specification sheet - S16R-MPTA (marine generator)
2Pages

1480 - 1590 kW | MARINE GENERATOR NOT REGULATED MITSUBISHI MARINE ENGINE RELIABLE MECHANICAL ENGINE ENGINE DATA Engine model Cylinder configuration Compression ratio single cooling circuit; charge air cooler integrated in jacket water system (aftercooler) 4-stroke, water-cooled diesel engine, with direct-injection, turbocharger and air-cooler Cooling method Total displacement Auxiliary Generator Emergency Generator Fuel consumption 100% load (g/kWh) Fuel consumption 75% load (g/kWh)3 Fuel consumption 50% load (g/kWh) Average fuel consumption (l/h) For rating definitions, please see our website. Atmospheric condition: barometic pressure: 100kPa, ambient temperature: 298K, relative humidity: 30%. Fuel consumption is based on ISO3046/1 with +5% tolerance at rated power, weighing 836 g/liter and a LHV of 42,780 kJ/kg, excluding pump. Average fuel consumption recommended by ISO8178 (E3 standard test cyle for propulsion application FPP). © Mitsubishi Turbocharger and Engine Europe B.V. | This specification may be revised without prior notice. All pictures shown are for illustration purpose only.

STANDARD AND OPTIONAL EQUIPMENT STANDARD EQUIPMENT Fuel system • Flexible fuel supply - and return hoses • Fuel feed pumps • Fuel fine filters, change-over type • Fuel injection pumps • Dual walled high-pressure fuel lines • Fuel injectors Lubricating oil system • Wet type oil pan with inspection covers • Oil pressure pump, gear driven • Lubricating oil filters, change-over type • By-pass filter • Oil cooler with thermostat Starting and electrical system • Electric starter (Earth floated 24V) • Alternator, 30 Amps. • Stop solenoid (ETS) Cooling system • Fresh water pump including piping and...