neptulink System Presentation
5Pages

Microwave Vision Group J or internet access n coastal areas Presentation The purpose of NeptuLink by is to satisfy the broadband IP communication needs of users on board ships and various vessels in coastal areas (fishing boats, yachts, research vessels, wind farms, coast guard & sea rescue vessels, etc.) as well as in port areas (video transmission for crane operators, etc.). ^ Do you know? Current solutions (HF, VHF) are either limited in terms of bandwidth (~10 kbits/s) or expensive (satellite communications). NeptuLink by MVG allows high speed connectivity to 4G networks at the same cost of mobile phone data

The NeptuLink by MVG terminals connect to LTE networks (frequency bands 1, 3, 7, 8 and 20), thus allowing communications at over 10 Mbps for distances over 10 nautical miles. If the terminal is not in an area with LTE coverage, it is able to fall back on less advanced technology (UMTS and then GSM) to stay connected. The system lets you connect a PC transparently via its Ethernet connection so that it can directly access a high-bandwidth IP network. The same Ethernet connection can also be connected directly to a Wi-Fi router, which will provide access to a wireless broadband network for...

Test campaigns conducted The NeptuLink by MVG terminals were tested over three test campaigns at sea. The first two campaigns were conducted in June and December 2013 using the Images & Réseaux hub’s ImaginLab LTE experimentation platform (http://imaginlab.images-et-reseaux.com/). Using the same network, an LTE connectivity demonstration was also given for the DIRISI and the Chief of Staff of the French Navy in November 2013. Carried out by Images et Réseaux and Crystal SC, this demonstration, which implemented the LTE terminals developed by MVG installed on a French Navy tugboat...

Rx received by the telephone: Less than -105 dBm Between -105 and -95 dBm Between -95 and -85 dBm Between -85 and -75 dBm Greater than -75 dBm No reception Base station RSRP Measurements taken under the same conditions using a 4G Android tablet The measurements taken in parallel with the NeptuLink by MVG system and a 4G Android tablet clearly show the advantage of the proposed system – the reach, the received power levels and, as a result, the accessible throughput are significantly higher. We were able to measure differences of around 30 dB in received power on the different terminals...

RSRP – Measurements from 07/15/2014 RSRP – Measurements from 07/15/2014 to 07/18/2014 Uplink and downlink throughput The throughput measured during this campaign varied between 10.7 Mbps and 1.2 Mbps for the uplink, and between 16.5 Mbps and 2.4 Mbps for the downlink. Contact your local sales representative for more information sales@microwavevision.com www.microwavevision.com © MVG 2015 - Graphic design: www.ateliermaupoux.com, pictures: © Taiga - © Dmitriy Rumyantsev - © Bokica - Fotolia.com, all rights reserved. Product specifications and descriptions in this document are subject to...