Mirhioan FEDERAL

ichigan Wheel manufactures propellers with particular emphasis on tolerance specifications. Each Propeller meets exacting tolerances, and is fully inspected.

Since 1903, Michigan Wheel Marine has been the world leader in propulsion and marine manueverability systems. We are the go-to propeller supplier to custom yacht manufacturers, production boat builders, commercial shipyards and goverments around the world. For those that seek to optimize performance and efficiency, Michigan Wheel has the expansive propeller design and analysis capabilities to increase speeds, improve cruising range, and provide exceptional passenger comfort levels. TABLE OF CONTENTS | Michigan Propellers | Pleasure Boat Propellers QUALITY. Michigan Wheel Marine is committed to...

For those that seek to optimize performance and efficiency, Michigan Wheel has the expansive propeller design and analysis capabilities to increase Michigan Propellers speeds, improve cruising range, and provide exceptional passenger comfort levels. Photo Courtesy of Hatteras Yachts

Photo Courtesy of Tiara Yachts Available Alloys “X” SERIES Michigan Propellers The “DJX” and “DQX” are evolutions of the classic Dyna-Jet and Dyna-Quad propeller designs, respectively, and are more closely optimized for modern marine craft. “X” Series propellers are the benchmark standard for high quality, performance-oriented propellers. All “X” Series propellers are designed to efficiently use the higher engine power boating production by modern boat engines, both gas and diesel. With higher blade areas, the “X” propellers can better convert extra power into additional thrust. The increased...

Standard Taper Bore (Inches) Expanded Area Per Blade (sq.in) Minimum Bore Maximum Bore Pilot Bore Maximum Blade Width (Inches) Expanded Area Per Blade (sq.in) Standard Taper Bore (Inches) Minimum Bore Maximum Bore Pilot Bore Maximum Blade Width (Inches) Expanded Area Per Blade (sq.in) Standard Taper Bore (Inches) Minimum Bore Maximum Bore Pilot Bore Full Taper Full Taper Full Taper Full Taper Full Taper Full Taper Full Taper Maximum Blade Width (Inches) Full Taper Photo Courtesy of Sea Ray Corporation Photo Courtesy of Tiara Yachts Photo Courtesy of Silverton Marine Corp.

Photo Courtesy of Silverton Corp. Available Alloys PLEASURE BOAT PROPELLERS Michigan Propellers Designed for the pleasure craft owner who looks for the ultimate performance and speed. The Dyna-Jet and Dyna-Quad are the most popular propeller series in the world for pleasure boat applications. (Pitch/Diameter Ratio) (Pitch/Diameter Ratio) (Pitch/Diameter Ratio) offer a more comfortable ride, sized boats. It has been the is the right choice. Its excellent most popular propeller in the 3-blade, while providing more design and increased blade world for the past 50 years, thrust via greater blade...

Dyna-Jet & Dyna-Quad Specifications Diameter Standard Taper Bore (Inches) Minimum Bore Maximum Bore Pilot Bore Maximum Blade Width (Inches) Expanded Area Per Blade (sq.in) Maximum Blade Width (Inches) Expanded Area Per Blade (sq.in) ** For Dyna-Jet Series propellers only - Sizes (Dia. x Pitch) 17x16, 17x17 & 17x18 maximum bore is 1-1/2”. All other 17” diameter sizes - maximum bore is 1-3/8”. Standard Taper Bore (Inches) Expanded Area Per Blade (sq.in) Minimum Bore Maximum Bore Pilot Bore Maximum Blade Width (Inches)

Available Alloys SAILBOAT PROPELLERS Michigan fixed pitch propellers are designed to produce performance - with or without wind. Sailboat Propellers SAILER 2-BLADE Specifications 0.31 E.A.R. Diameter Range: 10” - 20” The 2-Blade Sailer fixed pitch propeller is the popular choice for sailboaters seeking to maximize speed. It offers minimum drag while under sail and the power to get you where you’re going when the wind stops blowing. SAILER 3-BLADE Specifications 0.46 E.A.R. Diameter Range: 10” - 20” The 3-Blade Sailer is the propeller of choice for the cruising sailboats. It offers superior dock...

Available Alloys Weedless A-C Specifications Diameter Inches Maximum Straight Bore (Inches) Available Pitch Maximum Blade Width (Inches) Expanded Area Per Blade (sq.in) Weedless W-C Specifications Diameter Inches Available Pitch Maximum Blade Width (Inches) Maximum Straight Bore (Inches) Expanded Area Per Blade (sq.in) Weedless H-D Specifications Diameter Hub Dimensions (Inches) Available Pitch Maximum Standard Taper Bore (Inches) Maximum Straight Bore (Inches) Maximum Blade Width (Inches) Expanded Area Per Blade (sq.in) Straight Bore Tapered Bore Standard Taper Bores primarily for smaller air-cooled...

Photo Courtesy of Breaux Brothers COMMERCIAL BOAT PROPELLERS Commercial propellers that are modeled after the popular Dyna-Quad pleasure series. Commercial Propellers DQ SPECIAL Pac-Master features a durable applications where more design to ensure long running traditional Dyna-Quad design, durability and/or blade area is life. The increased blade-root boasting more muscle through required. Dura-Quad thickness gives extra more blade area. It is available propellers have the skewed in larger diameters, with area and highly efficient blade ratios suitable for today’s high- design of the traditional...

DQ Special Specifications (0.86 E.A.R.) Diameter Standard Taper Bore (Inches) Expanded Area Per Blade (sq.in) Minimum Bore Maximum Bore Pilot Bore Maximum Blade Width (Inches) Full Taper Full Taper Full Taper Full Taper Full Taper Full Taper Full Taper Full Taper Full Taper Full Taper Full Taper Full Taper Full Taper * WR2 = ±10% in Air (inch squared lbs.) Notes: 1. Mass moment of inertia properties calculated using minimum standard bore. 2. Mass moment of inertia properties calculated using bronze. 3. Some DQ Specials have blade area other than 0.86. Dura-Quad Specifications (0.76 E.A.R.) Diameter...

MACHINE PITCH Specifications 0.51 E.A.R. - Diameter Range: 9” - 60” 0.47 E.A.R. - Diameter Range: 62” - 96” The most well-known, finest crafted 3-blade propeller for Commercial Propellers all purpose use. This style and design is primarily used on vessels with speeds less than 15 knots. The design of MP-style propellers include: semi-elliptical shape; constant pitch; and ogival blade sections. The Heavy Duty (HD) is identical in design to the Machine Pitch, but incorporates thicker blade edges, engineered specifically for severe conditions. These edges resist abrasion and blade fracture. Available...