*mynauticexpo

LFP series 24 V

Product catalog summary

Overview
The LFP Series by MGEnergy Systems offers advanced 25.6 V Lithium-Ion batteries utilizing next-generation LiFePo4 chemistry. These batteries are designed for a wide range of applications including marine, industrial, off-grid, and automotive sectors. They are characterized by high energy density, compact size, and lightweight design, making them suitable for both small and large systems.

Technical Specifications

Nominal Voltage and Capacity: 25.6 V / 280 Ah
Nominal Energy: 7.2 kWh
Cycle Life: Over 3500 cycles at 80% Depth of Discharge (DOD)
Weight: 53 kg
Discharge: Cut-off voltage at 21.6 V, continuous current at 280 A
Charge: Maximum voltage at 29.2 V, continuous current at 280 A
Configuration: Series up to 16, parallel unlimited
Environmental: Operating temperature range for charge 0 to +45°C, discharge -20 to +55°C
Mechanical: IP40 protection, air convection cooling

Safety and Management
Each battery module includes an integrated Battery Management System (BMS) that monitors cell voltages and temperatures, ensuring safe operation through balancing and protection against over-charging, over-discharging, and temperature extremes. The system communicates via CAN-Bus with MG Master LV or HV controllers, which manage and protect the battery modules.

Installation and Flexibility
The LFP Series supports plug-and-play installation with automatic configuration, reducing setup time and complexity. The system's flexibility allows for redundant configurations by connecting multiple Master BMSs in parallel, enhancing reliability and capacity.

Applications
The batteries are suitable for various applications such as electric propulsion, peak shaving, UPS systems, off-grid solutions, and electric mobility. They can be used in both low voltage (up to 96 V) and high voltage (up to 470 V) solutions.

Standards and Compliance
The batteries comply with EMC emission and immunity standards (EN-IEC 61000-6-3 and EN-IEC 61000-6-1) and the low voltage directive (EN 60335-1).

Catalog excerpts

Innovation in energy storage ENERGY SYSTEMS innovation in energy storage . - V® Innovation in energy storage Technical specifications 1 End-of-Life is 70% of initial capacity at 25 °C. 2 Including BMS and enclosure. 3Duration is dependingon batterytemperature. 4Fuses can be replaced with dummy fuses for high power and high voltage applications. In this case the batteries need to be fuse elsewhere in the circuit. 5 For systems >144 V, order the M12, HV version. LFP Series25.6 V Lithium-Ion batteries Next generation LiFePo4 chemistry Low voltage solutions: Up to 96 V High voltage solutions: Up to 470 V Plug and Play installation: Automatic configuration High charge and discharge rate Redundant option NMEA2000 compatible Marine Industrial Off-grid/Solar Automotive Electric propulsion Peak shaving Self-consumption Mobile power sources Aux. battery bank UPS systems Off-grid solutions Electric mobility MG Energy Systems B.V | Foeke Sjoerdswei 3 | 8914 BH Leeuwarden | The Netherlands +31 (0)58 750 89 471 [email protected] | www.mgenergysystems.eu

Open the catalog to page 1

Innovation in energy storage � Battery management controllers This robust battery is based on the next generation LiFePo4 Protecting, monitoring and controlling a battery system is very chemistry. The advantage of this next generation chemistry is important to create a safe, reliable and easy-to-use system. The MG the higher energy density. The modules are very compact and Master LV or HV is the safety and control unit of the battery system. light weight with high charge and discharge capability. The It protects the connected battery modules against over-charging, LFP series can be used for a...

Open the catalog to page 2

All MG Energy Systems B.V. catalogs and brochures

HE series
2 Pages
LFP series
2 Pages
RS series
2 Pages