Grade 80 chain slings and accessories
13Pages

GRADE 80 CHAIN SLINGS A

Instructions for Safe Use of Chain Sling and Accessories This information is of a general nature covering universal safety guidelines on the use and maintenance of chain slings for general lifting purposes. Operating guidelines may vary with specified use conditions, industry or government regulations. Quality To International Standards Mordec Grade 80 sling fittings are manufactured using only high tensile alloy steel for its strong mechanical properties, and tested to EN-818 for alloy chain, EN-1677 for fittings. ♦ Forged alloy steel body, quenched and tempered ♦ Proof load tested at 2.5...

Instructions for Safe Use of Chain Sling and Accessories Alloy chain can be used in a variety of applications including lifting, lashing and towing, and are often selected for operations in rough conditions as they are flexible, strong and durable. Careful selection of slings and fittings should be made based on load conditions when planning lifting activities. Only alloy chain and accessories that are Grade 80 and above can be used for lifting applications. ♦Chain slings must be cleaned prior to any inspection as dirt or oil may hide any damage ♦All slings must be kept in clean and dry...

Instructions for Safe Use of Chain Sling and Accessories Before Lifting - Always Plan The Lift Each lifting operation should be conducted by a Competent Person who must first plan the lift by calculating the load weight, centre of gravity, lifting method, rated working load limit, inspect the equipment and prepare the area where the operation will take place. Important Warning During Any Lift ♦ Do not exceed the rated WLL of the sling or component whichever being lower rated ♦ Correct size sling and components must be used for the load including angles or uneven load ♦ Ensure load is fully...

MORDEC LIFTING SOLUTION Chain Sling System Masterlink Assemblies G80 Alloy Clevis Safety ♦ Figures shown are for new slings only ♦ Working Load Limit shown are for vertical lift, for symmetric load with equal weight on each leg only. ♦ Asymmetric load with unequal weight are to use the following Working Load Limit: ♦ Connecting components must match the determined chain size ♦ Not to be used in environment with extreme temperature, corrosion inducing, alkaline or acidic Mordec Masterlink & Masterlink Assembly Chain Sling EN 818-4 Working Load Limit Table Recommended Masterlink, Masterlink...

Grade 80 Alloy Connecting Link ♦ Designed for use with Grade 80 alloy chain or wire rope ♦ Use to connect alloy chain to accessories for lifting application ♦ Identical sides for easy assembly without special tools or skills ♦ Traceability code, MORDEC, CE and Size Code embossed Material: High Tensile Forged Alloy Steel Construction: Quenched and Tempered Finish: Powder Coated Proof Load: Proof Load Tested at 2.5 times of Working Load Limit Fatigue: Fatigue Rated at 1.5 times of Working Load Limit "Design Factor 4:1 proof tested and certified

Grade 80 Alloy Eye Sling Hook with Latch ♦ Designed for use with Grade 80 Alloy chain or wire rope ♦ Use for overhead lifting application ♦ Safety latch to prevent load disengagement ♦ Stainless steel latch and spring to prevent rust ♦ Traceability code, MORDEC, CE and Size Code embossed Material: High Tensile Forged Alloy Steel Construction: Quenched and Tempered Finish: Powder Coated Proof Load: Proof Load Tested at 2.5 times of Working Load Limit Fatigue: Fatigue Tested at 1.5 times of Working Load Limit 'Design Factor 4:1 proof tested and certified

Grade 80 Alloy Eye Safety Hook ♦ Designed for use with Grade 80 Alloy chain or wire rope ♦ Use for overhead lifting application ♦ Safe automatic self-locking mechanism when load is lifted ♦ Eliminates any danger from touching the latch ♦ Traceability code, MORDEC, CE and Size Code embossed Material: High Tensile Forged Alloy Steel Construction: Quenched and Tempered Finish: Powder Coated Proof Load: Proof Load Tested at 2.5 times of Working Load Limit Fatigue: Fatigue Tested at 1.5 times of Working Load Limit * Design Factor 4:1 proof tested and certified

Grade 80 Alloy Eye Grab Hook ♦ Designed for use with Grade 80 Alloy chain or wire rope ♦ Use to shorten or hold a length of chain ♦ Prevent slip-off by engaging chain through narrow gap and resting ridges ♦ Traceability code, MORDEC, CE and Size Code embossed Material: High Tensile Forged Alloy Steel Construction: Quenched and Tempered Finish: Powder Coated Proof Load: Proof Load Tested at 2.5 times of Working Load Limit Fatigue: Fatigue Tested at 1.5 times of Working Load Limit

Grade 80 Alloy Clevis Self Locking Hook ♦ Designed for use with Grade 80 alloy chain ♦ Use for overhead lifting application ♦ Safe automatic self-locking mechanism when load is lifted ♦ Eliminates any danger from touching the latch ♦ Button type trigger for easy handling ♦ Clevis opening prevents the use of wrong chain size ♦ Traceabilrty code, MORDEC, CE and Size Code embossed Material: High Tensile Forged Alloy Steel Construction: Quenched and Tempered Finish: Powder Coated Proof Load: Proof Load Tested at 2.5 times of Working Load Limit Fatigue: Fatigue Tested at 1.5 times of Working...

Grade 80 Alloy Chain ♦ Designed for use with Grade 80 accessories ♦ Use for overhead lifting application ♦ Versatile assembly for multipurpose ♦ High tensile steel for tougher and more reliable usage ♦ Non-greasy bright finish ♦ Anti-rust lubricant, two years protection ♦ MOR, traceability code and G8 embossed ♦ Strong and uniform chain link welding Proof Load: Safety Factor: High Tensile Alloy Steel Bright Finish Proof Load Tested at 2.5 times of Working Load Limit Fatigue Tested at 1.5 times of Working Load 'Design Factor 4:1 proof tested and certified