HOT WATER SANITIZING UNDERCOUNTER GLASSWASHER Special Features: • Auto Safe temperature control system - Guarantees 180°F (82°C) sanitizing final rinse temperature, regardless of incoming water temperature Reduced size - optimized for use as a glasswasher in smaller, space-restricted areas MIKE 2 electronic control system - advanced micro-computer technology for service diagnostics and end-user dishmachine settings. Includes one-touch operation, one-touch selection of three different cycle lengths, automatic temperature monitoring with digital display, and advanced service diagnostics Active Plus filtration system - Double filtration of wash water removes food soil, improves washing efficiency and saves detergent while easing cleaning chores Soft Start wash pump - Protects glasses from chipping or breaking Aqua-Stop - Automatically stops machine operation and turns off the external fill valve if an internal leak is detected Built-in booster heater with power rinse pump - Guarantees constant final rinse pressure and temperature for consistent, outstanding results Standard Features: Technical Specifications: ENERGY STAR Qualified Capacity 37 racks per hour Water consumption 0.66 gallons (2.5 liters) per rack Double-wall construction keeps heat inside the machine, reducing energy consumption and heat loss into the dishroom environment Variable programmed time cycles - 95, 150 and 210 seconds Fully automatic - automatic fill, automatic start, and automatic reset Built-in liquid detergent and rinse aid pumps Pumped drain for both floor and wall drain applications Machine shutdown activates an automatic rinse of the wash chamber to ease cleaning Stainless steel non-clogging wash and rinse arms Sloped ceiling is safer for the user and prevents dripping of soiled water onto sanitized ware Front mounted controls with digital temperature displays 3/4 Hp (0.56 kW) wash pump 304 and 316L stainless steel construction for corrosion resistance Type A air gap system eliminates need for vacuum breaker Accommodates coated wire glass rack (included) as well as normal dishracks Stainless steel stand - adds 8” (203mm) to height Stainless steel cabinet stand - adds 16-3/4” (426mm) to height Inline roller frame - 1-3/8” (35mm) H. Replaces standard legs; overall machine height 34-3/8” (873mm) Power cord kit Drain water tempering kit

Dimensions 36-5/8" (930mm) with door open All dimensions from floor +/- 1/2" (13mm) due to adjustable feet. Height is not adjustable if using optional inline roller frame. 12-7/16" (316mm) inside cavity clearance Side Elevation If using a wall drain, top of loop may be no higher than 24” (610mm) from floor Electrical terminal block D Strain relief provided at lower rear of machine. Terminal block is located behind rear panel. Adequate slack in the wiring should be provided to allow the machine to be moved for servicing. Fresh water connection 3/4" female garden hose supply connection is provided....