DV 120.2
4Pages

HOT WATER SANITIZING VARIOTRONICTM DOOR-TYPE DISHWASHER/ UTENSIL WASHER The clean solution Special Features: • VariotronicTM operation - Preset cycles have different wash pressures and cycle times. This permits thorough, outstanding cleaning of a variety of ware. - Cycle 1: Fine glassware - 7 PSI, 34 racks/hr. - Cycle 2: Dishes & glassware - 10 PSI, 54 racks/hr. - Cycle 3: Utensils & heavy soil - 15 PSI, 20 racks/hr. Auto Safe temperature control system - Guarantees 180°F (82°C) sanitizing final rinse temperature, regardless of incoming water temperature MIKE 2 electronic control system - advanced micro-computer technology for service diagnostics, one-touch operation, one-touch cycle selection, and automatic temperature monitoring with digital display Automatic push-handle cycle start Active Plus filtration system - Double filtration of wash water removes food soil, improves washing efficiency and saves detergent Soft Start wash pump - Protects dishes and glasses from breaking Aqua-Stop - Automatically stops machine operation and turns off the external fill valve if an internal leak is detected Built-in booster heater with power rinse pump - Guarantees constant final rinse pressure and temperature for consistent, outstanding results Standard Features: • Capacity 54 racks per hour Water consumption 1.13 gallons (4.28 liters) per rack Double-wall construction keeps heat inside the machine, reducing energy consumption and heat loss into the dishroom environment Fully automatic - automatic fill, automatic start, and automatic reset Pumped drain for both floor and wall drain applications Type A air gap system eliminates need for vacuum breaker Easily accessible detergent and rinse aid ports for fast and easy chemical dispenser installation Field-convertible for use in either straight-through or corner applications Built-in liquid detergent and rinse aid pumps Machine shutdown activates an automatic rinse of the wash chamber to ease cleaning Flanged, bolt-down feet External vent fan control Stainless steel non-clogging wash and rinse arms Drain water tempering kit Sloped ceiling is safer for the user and prevents dripping of soiled water onto sanitized ware Front mounted controls with digital temperature displays Powerful 2 Hp (1.49 kW) wash pump 304 and 316L stainless steel construction for corrosion resistance This dishwasher is compliant with the Reduction of Lead in Drinking Water Act (2011) amendment to the Safe Drinking Water Act (SDWA). MEIKO • 1349 Heil Quaker Blvd. • LaVergne

All dimensions from floor +/-1/2" (13mm) due to adjustable feet. Electrical terminal block Strain relief provided at lower rear of machine. Adequate slack in the wiring should be provided to allow the machine to be moved for servicing. Fresh water connection 3/4" female garden hose supply connection is provided. If using supplied external Y-strainer, female garden hose adapter may be removed to provide 1/2" NPT male or 3/4" NPT female connection as required. Supplied hose is 4' 7" (2616mm) in length. Drain connection Requires indirect connection to 1-1/2" (38mm) drain pipe (wall or floor)....

Tabling Cutout for Corner Installations If backsplash is higher than 2-1/2” (64mm), cut out as shown to clear door handle. Front-side cutout is only necessary if top of rolled edge is more than 3” (76mm) above tabletop. Page 3 • DV 120.2 • Updated 11-16 MEIKO • 1349 Heil Quaker Blvd. • LaVergne, TN 37086 • (800) 55-MEIKO • www.meiko.us • sales@meiko.us

Technical Specifications DV 120.2 Item Number ___________________ Unit will be an NSF and ETL-listed MEIKO DV 120.2 hot water sanitizing door type dishwasher / utensil washer. Operating voltage will be: ___ 208-230 V / 60 Hz / 1 Ph ___ 208-230 V / 60Hz / 3 Ph ___ 460 V / 60 Hz / 3 Ph Unit will utilize three user-selectable cycles. Each cycle will adjust the wash water pressure and cycle length to permit thorough washing of pots, pans and utensils as well as fine glassware and normal ware. Standard cycle length for dishes/glassware cycle will be 66 seconds. Unit will have front mounted...