AZP 80 CLOSE-COUPLED WASTE PULPER The clean solution Special Features: • Vertically-mounted side grinding system is less prone to jamming than traditional horizontal bottom-mounted grinders • Tungsten carbide cutting blades for outstanding performance and long life • Fully automatic operation • Self-cleaning mode at machine shutdown • Capacity 992 lbs. (450 kg) per hour of food waste • Powerful 8.8 hp grinder motor • Volume reduction of 70-85% Standard Features: • Can process mixed kitchen waste in addition to food waste, including Styrofoam, paper, and cardboard • Waste is reduced to a nearly dry pulp, with a volume reduction of 70-85%. Water and liquid waste is filtered and drained • Includes a vertical, side-mounted grinding mechanism and a vertical dewatering press in one unit • Waste can be loaded using a continuous flushing trough, or manually • Magnet and catch tray at trough entrance restrict metal cutlery from entering the grinding mechanism • Door safety switches protect the operator. The unit is shut down automatically if the grinder or dewatering press access doors are opened during operation • Convenient, reliable electromechanical controls • Grinding motor is mounted horizontally for easier serviceability • Vertical dewatering press chamber incorporates self-flushing system to ease cleanup • Flush-paneled, stainless steel exterior • Automatic water level control • Built-in connection points for odor neutralizing pumps Options: • Available in left-to-right or right-to-left configurations • Choice of waste chute locations: front, rear or inline • Choice of water circulation pumps to accomodate a variety of flushing trough systems • Separate control panel at remote location • Flanged, bolt-down feet Page 1 • AZP 80 • Updated 4-14 MEIKO • 1349 Heil Quaker Blvd. • LaVergne, TN 37086 • (800) 55-MEIKO • www.meiko.us •

AZP 80 Dimensions (left to right) 1' 3-3/4" (400mm) Trough (see inset drawing) 7-7/8" (200mm) Trough (supplied by others) Chute can be specified to discharge to the front, inline or rear at time of order. See detail drawings for dimensions. Control panel Electrical supply connection 4-wire (L1, L2, L3, GND) connection without neutral. Supply routed from below the machine (strain relief provided). Individual circuit breaker/ disconnect with lockout/tagout strongly recommended. Drain connection 2" NPT. Recommend placement directly above 3” (75mm) floor drain. Additional piping to drain (if so required)...

AZP 80 Dimensions (right to left) 1' 3-3/4" (400mm) Trough (see inset drawing) Control panel Trough (supplied by others) Chute can be specified to discharge to the front, inline or rear at time of order. See detail drawings for dimensions. Removable diffuser plate concepts Recommended trough construction Diffuser plate (installed) Head of trough should include 45° diffuser plate to distribute water across the entire floor of the trough. Opening below diffuser plate should be approx 3/4" (20mm) from floor of trough. Diffuser plate should be removable for cleaning. Exact configuration and fastening...

Water trough connection The MEIKO AZP 80 includes an integral connection for attachment to a recirculating water trough. If the machine is to be installed without a recirculating water trough, contact MEIKO at [email protected] for additional options and assistance. (1708 x 699 x 2064mm) Some options and accessories may affect shipping weight or dimensions. Contact MEIKO at [email protected] for assistance. This machine may not pass through standard doorways without machine disassembly or doorway modification. Check all dimensions carefully prior to ordering, or contact MEIKO at [email protected] for assistance....