Stern Pod range Product data sheet - Pod 100 Details: Typical boat size: Tunnel diameter (inside): Tunnel thickness: Nominal power voltage: Control system voltage: Performance data: Test power voltage: The POD 100 is part of Max Power’s new Stern Pod range designed to simplify the traditionally problematic installation of stern thrusters in motor boats. This single pre-assembled unit reduces potential installation errors, has twin propellers, a 185mm diameter stern tunnel complete with deflectors and a thrust rating of 96 / 211 (kg / lbs). Unique Features: Ignition Protected & Water Resistant High power connections Composite drive legs Zero maintenance Line shields High spec. DC contacters Purpose built DC motors Unrivalled safety features Case hardened spiro-conical gears Stern Pod Installation: Easy to install and requiring nothing other than simple electrical connections, the Stern Pod greatly reduces installation time. The Stern Pod can be directly fitted from the outside of the boat thus requiring little or no work in the often inaccessible and cramped transom area. Ignition protected and water resistant, the thruster’s motor is protected from water and the corrosive atmosphere in the bilge. NB. Performance data is given for a thruster installed at one tunnel diameter immersion depth, in a tunnel no longer than twice the tunnel’s diameter and this within a variation of + / - 6%. Higher voltages will result in higher thrust ratings, higher power consumption and a reduced duty cycle. Longer tunnels will result in lower thrust ratings and higher power consumption.