SURESEAL
5Pages

{{requestButtons}}

Catalog excerpts

SURESEAL - 1

OPERATING PRINCIPLE PRODUCT OVERVIEW Key components/features of the SureSeal include: - Housing: Made from fiber-reinforced composite material, the housing is stronger, smaller and more durable. Dimensionally unaffected by temperature changes, the SureSeal will not absorb water. - Bearing: The integral PTFE bearing extends the useful operating life of the SureSeal under normal operating conditions. Should the water injection system fail to provide lubrication to the lip seal and bearing surface, the integrity of the SureSeal PTFE bearing and fiber-reinforced housing is unaffected. This feature allows the vessel operator to simply replace the worn lip seal, restoring the “100% watertight” characteristic of the SureSeal. - Hose: Connecting the SureSeal to the boat has been made easier via an «articulating» hose. Matched to each housing size, the hose design positions the unit relative to the stern tube so that the required operating clearance is achieved without measurement (simplifying installation). This greatly reduces the side loads to the SureSeal when shaft misalignment occurs (as much as 1/4» in any direction), extending lip seal and bearing life. - Hose Clamps: The hose clamps themselves are an improved design which won’t tear or mar the hose surface, require less tightening force and adjust to the changes in the hose diameter caused by variations in temperature and pressure. - Seal Replacement: The new design incorporates a removable front cap which allows access to the lip seal making it easier to remove and replace, especially in «cramped quarters». MAUCOUR FRANCE - VOTRE SPÉCIALISTE EN PROPULSION MARINE DEPUIS 1868 - WWW.MAUCOUR.FR 5, rue de la Dutée - CP 1202 - 44806 Saint-Herblain cedex- Tél. +33 (0)2 40 92 16 36 - Fax : +33 (0)2 40 92 02 89 - info@maucour.fr Ce document n’est pas contractuel - This document is not contractual The Sureseal consists of a bellows to be mounted on the sterntube and fixed by two clamps. An inner bearing allows the lineage of the seal on the shaft. The bearing is lubricated with a water injection and grooves in the bore. The seal on the propeller shaft is made b

Open the catalog to page 1
SURESEAL - 2

SURESEAL BEFORE ORDERING Find the combination of these two dimensions in the following table and the corresponding part numbers. For each model SureSealTM , find dimension ”C” and confirm that there is AT LEAST this much CLEAN, SMOOTH shaft before the stern tube available for locating the unit. Next, the diameter «D» should be noted. Confirm that a minimum distance of 1/4 inch can be maintained between the body of the unit and any other part of the boat (hull, stringers, etc.) to allow for any lateral shaft movement. In twin-engine applications, SureSealsTM may be ordered with an optional...

Open the catalog to page 2
SURESEAL - 3

SURESEAL SHAFT Ø (Inch) Minimum Distance (Inch) Code Complete Sureseal® Hose & Clamp included MAUCOUR FRANCE - VOTRE SPÉCIALISTE EN PROPULSION MARINE DEPUIS 1868 - WWW.MAUCOUR.FR 5, rue de la Dutée - CP 1202 - 44806 Saint-Herblain cedex- Tél. +33 (0)2 40 92 16 36 - Fax : +33 (0)2 40 92 02 89 - info@maucour.fr Ce document n’est pas contractuel - This document is not contractual

Open the catalog to page 3
SURESEAL - 4

ÉTANCHÉITÉS SURESEAL SHAFT Ø (Inch) Minimum Distance (Inch) Code Complete Sureseal® Hose & Clamp included Code Complete Sureseal® Hose & Clamp included Other dimensions on request MAUCOUR FRANCE - VOTRE SPÉCIALISTE EN PROPULSION MARINE DEPUIS 1868 - WWW.MAUCOUR.FR 5, rue de la Dutée - CP 1202 - 44806 Saint-Herblain cedex- Tél. +33 (0)2 40 92 16 36 - Fax : +33 (0)2 40 92 02 89 - info@maucour.fr Ce document n’est pas contractuel - This document is not contractual Other dimensions

Open the catalog to page 4
SURESEAL - 5

SURESEAL SPARE SEAL CARRIERS Spare Seal Carriers were developed as a convenient place to store spare lip seals. Installed at the same time as the SureSeal, these units allow lip seal replacement to be performed without uncoupling the shaft from the transmission and, if necessary; while the vessel is in the water (a haul-out may not be necessary). The unit is a lightweight, two-piece fiber-filled nylon housing which is clamped to the shaft between the SureSeal and transmission coupling. Available in both English and Metric sizes, units up to 1 3/4“(44mm) include one spare seal, 2”(51mm) and...

Open the catalog to page 5

All MAUCOUR FRANCE catalogs and brochures

  1. ERCEM GV

    8 Pages

  2. GTX SEALS

    1 Pages

  3. ROPE CUTTERS

    1 Pages

  4. NOZZLES

    1 Pages

  5. VIBRALESS

    1 Pages

  6. CATALOG 2015

    156 Pages