PDF Compressor Pro STANDARD PROPELLERS QUALITY AND SERVICE Our standard propellers are manufactured according to standards ISO484-2 and ISO484-1 in tolerance Class 2. We can offer these propellers with tighter tolerances, Class 1 or Class S upon request. All our propellers are statically and could be dynamically balanced for speciic applications (high speed) or on request. If required, we can manufacture propellers following standards form classiication societies standards (Bureau Veritas, Lloyd’s Register, ABS, RINA, RMRS, etc ...). Propeller design according to the applicable norms Submission of drawing for approval by the classiication so ciety Provision of a 3.1 or 3.2 material certiicate for factory inspec tion Final plant inspection with the classiication society Provision of inspection certiicate from classiication society All propellers are marked with a unique serial number, enabling complete traceability of the latter, both on the quality of the material as its design. MATERIAL Our standard propellers are made of manganese-bronze (HTB1) for pleasure applications or when high resistance to electrolytic phenomena and cavitation is not especially required. For professional applications or for aluminum hulls we offer our range of propellers in Aluminium Bronze (AB2). This material allows: To reduce blade sections to increase the eficiency of the propeller To absorb more power with equal section from its high mechanical properties To resist much more electrolysis phenomena due to its speciic chemical composition Although these two materials cover all marine applications, on request we can produce aluminum propellers or stainless steel. MAUCOUR FRANCE - VOTRE SPÉCIALISTE EN PROPULSION MARINE DEPUIS 1868 - WWW.MAUCOUR.FR 5, rue de la Dutée - CP 1202 - 44806 Saint-Herblain cedex- Tél. +33 (0)2 40 92 16 36 - Fax : +33 (0)2 40 92 02 89 - [email protected] Ce document n’est pas contractuel - This document is not contractual

Helices & lignes d'arbres STANDARD PROPELLERS HYDRAPOISE 3.45 DIAMETER PITCH (Inch) SHAFT 0 Other dimensions on request The HYDRAPOISE 3.45 is ideal for low powered displacement workboats and auxiliary sail craft. The aerofoil sections are designed to give optimum performance and manoeuvrability. Manufactured from high tensile manganese bronze as standard, it can also be supplied in nickel aluminium bronze for applications where enhanced strength and resistance to corrosion are required. Ce document n'est pas contractuel - This document is not contractual - Aluminium Bronze Material - Non standard...