Introduction
Maucour France specializes in marine propulsion systems, offering a range of products including the Bronze Flanged Sterntube. This document provides technical specifications and installation guidelines for the sterntube.

Specifications
The Bronze Flanged Sterntube is designed for use when the engine or gearbox is mounted on soft pads, eliminating the need for an intermediate bearing between the rear bearing and coupling. It includes a spacer tube, a water scoop outer bearing, and an inboard flexible gland assembly. The bearing is lubricated by water from the engine cooling system, injected through the inboard flexible gland. The tube length is specified by the customer.

Materials
The sterntube is primarily made of bronze, with other materials available upon request.

Installation
A water inlet, typically connected to the engine cooling system, can be installed on the tube near the seal, depending on the application.

Technical Data
The document provides a table with dimensions for various shaft diameters, detailing measurements such as A, B, Ø C int./ext., Ø D, Ø E, F, G, H, and I for shaft diameters ranging from 22 mm to 60 mm. Materials used include Inox, Laiton, and Bronze.

Conclusion
This document serves as a non-contractual technical guide for the Bronze Flanged Sterntube, providing essential specifications and installation instructions for marine propulsion systems.