MATRE BALANCED FOAM PROPORTIONERS E-mail: company@matre,no

Datasheet ATRE Turbine In-Line Foam Proportioners Datasheet for MATRE© Balanced Foam Proportioners Page 2 of 13 The specifications and information herein are subject to change without notice. Matre Maskin AS ; 5420 Rubbestadneset, Norway; Tel:+47 53 42 77 44; Fax: +47 53 42 78 92; E-mail: [email protected]; Web: www.matre.no

Datasheet ATRE Turbine In-Line Foam Proportioners General product information Matre Balanced Foam Proportioners are known for their reliability. They are extremely reliable and precise. Pressurized water within the performance range and foam is what is required for a perfect proportioning. The range is from 100% flow and down to 10% (some are slightly less). For test purposes or to run the system with water only it is possible to close the foam inlet or to insert water also in the foam inlet. The simple and robust construction of Matre Balanced Proportioner ensures that it is practically maintenance...

Datasheet ATRE Turbine In-Line Foam Proportioners Flow range and interface guide All the flow ranges are available with different interfaces. In the following tables you can find the available interface dimensions for the different flow ranges. Standard product dimensions and interfaces can be found in this section. All information in the following table apply to standard Balanced Proportioners. For information about different interfaces and materials contact us On general basis water connection is based on ANSI 150lb and DIN PN16 the same unit will fit both. The foam inlet is BSPP F. Check valves...

Datasheet ATRE Turbine In-Line Foam Proportioners Water conn. 4” ANSI DN 100 Foam inlet Range (l/min) Page 5 of 13 The specifications and information herein are subject to change without notice. Matre Maskin AS ; 5420 Rubbestadneset, Norway; Tel:+47 53 42 77 44; Fax: +47 53 42 78 92; E-mail: [email protected]; Web: www.matre.no

Datasheet ATRE Turbine In-Line Foam Proportioners Water conn. 10” ANSI DN250 Foam inlet Range (l/min) Current models Water conn. Foam inlet Range (l/min) Insertion rate Page 6 of 13 The specifications and information herein are subject to change without notice. Matre Maskin AS ; 5420 Rubbestadneset, Norway; Tel:+47 53 42 77 44; Fax: +47 53 42 78 92; E-mail: [email protected]; Web: www.matre.no

Datasheet ATRE Turbine In-Line Foam Proportioners Water conn. Foam inlet Range (l/min) Insertion rate Page 7 of 13 The specifications and information herein are subject to change without notice. Matre Maskin AS ; 5420 Rubbestadneset, Norway; Tel:+47 53 42 77 44; Fax: +47 53 42 78 92; E-mail: [email protected]; Web: www.matre.no

Datasheet ATRE Turbine In-Line Foam Proportioners Water conn. Foam inlet Range (l/min) Insertion rate CV= check valve X= available on request The green lines is optimised 1% proportioners. They will have more precise performance especially at the lowest flow area. Page 8 of 13 The specifications and information herein are subject to change without notice. Matre Maskin AS ; 5420 Rubbestadneset, Norway; Tel:+47 53 42 77 44; Fax: +47 53 42 78 92; E-mail: [email protected]; Web: www.matre.no

Data sheet MATRE Balanced foam Proportioned The curve shows pressure loss related to the proportioners relative capacity If the proportioner model has several insertion options 100% capacity is according to the lowest insertion rate. PRESSURE LOSS The specifications and information herein are subject to change without notice.

Datasheet ATRE Turbine In-Line Foam Proportioners Dimensional figures General dimensions Foam inlet BSPP F NPT M ANSI 150LB BSPP F NPT M ANSI 150LB BSPP F NPT M ANSI 150LB BSPP F NPT M ANSI 150LB BSPP F NPT M ANSI 150LB BSPP F NPT M ANSI 150LB BSPP F NPT M ANSI 150LB BSPP F NPT M Page 10 of 13 The specifications and information herein are subject to change without notice. Matre Maskin AS ; 5420 Rubbestadneset, Norway; Tel:+47 53 42 77 44; Fax: +47 53 42 78 92; E-mail: [email protected]; Web: www.matre.no

Data sheet MATRE Balanced foam Proportioners The specifications and information herein are subject to change without notice.

Data sheet MATRE Balanced foam Proportioners 10 Dimensions for current models Dimensions can be changed without notice. Please contact Matre for final confirmation The specifications and information herein are subject to change without notice.

Data sheet MATRE Balanced foam Proportioners Foam inlet position options Position B is standard and will be supplied if no option is specified. The specifications and information herein are subject to change without notice.