*mynauticexpo

M-WP60

Product catalog summary

Standard Design

Characteristics: The Wide Range Proportioner M-WP60 is constructed from BS 1400 LG2 material. It features a 6” ANSI B16.5 150 lb interface for water supply and a DN40 PN16 interface for foam supply.

Pressure Specifications: The design pressure is 16 bar, with an optional 20 bar (not VdS certified). The test pressure is 24 bar, with an optional 30 bar (not VdS certified).

Flow and Pressure Range: The flow range is between 100-9000 l/min, and the water pressure range is 5-16 bar, with an optional range of 5-19 bar.

Bladder Tank Arrangement: Requires the same pressure on foam liquid and water inlet pressure.

Insertion Rates: The proportioner supports insertion rates of 1%, 2%, 3%, and 6% with specific tolerances and limitations. For example, 6% insertion is limited to a maximum flow of 4000 l/min.

Weight: The unit weighs 21 kg.

Installation Requirements: Requires a straight pipe minimum of 3 x DN at the inlet. The outlet piping must match the inlet specification, but there are no requirements for straight pipe length.

Catalog excerpts

E-mail : [email protected] www.matre.no U f\ A /\ O11 t/ t/ X WIDE RANGE PROPORTIONER M-WP60 STANDARD DESIGN Foam type: AFFF Interface for water supply Interface for foam supply Design pressure Test pressure Flow range Water pressure range Bladder tank arrangement Requires same pressure on foam liquid and water inlet pressure. Installation requirements Straight pipe minimum 3 x DN at inlet. Outlet piping to same specification as inlet, but no requirements for straight pipe length.

Open the catalog to page 1

M-WP60

M-WP60

Catalog excerpts

All Matre Maskin AS catalogs and brochures