*mynauticexpo

M-TRT2-03163

1 / 2 PagesView full catalog

M-TRT2-03163

Product catalog summary

Technical Specifications

Total Measure Range: 0 - 38 bar
Switch for Ranges: 0 – 5 bar, 5 – 20 bar, 20 – 38 bar
Accuracy: Better than ± 1.0%
Adjustment: Cero adjustment screw
Power Supply: 230 VAC, 50 – 60 Hz and/or 2 x 9 V 6LR61 battery (15 hours lifetime)
Pressure Connection: 2m hose with claw coupling, options include M10x1, M16x2, 3/8” BSP
Material: Aluminum and Brass
Storage: Wooden box, Dimensions: Depth 325 mm, Width 255 mm, Height 200 mm, Weight 5.6 kg

User Manual

To fill the cylinder with oil, turn the spindle to the outer position and remove the filling plug.
Connect the pressure switch using standard Minimess, M16X2, or 3/8” BSP connections. A special claw coupling is available for direct connection.
Adjust pressure using the spindle; readings are displayed digitally on the LCD.
Select pressure ranges and switch off the system using the knob.
Power supply connection, battery pockets, and cero adjustment screw are located on the electronic unit.
Battery power is disabled when AC power is connected.
For cero adjustment, ensure the hose end is open to atmospheric pressure, select 0-5 bar range, and adjust using a screwdriver.
To prevent oil spills during storage, block the hose end with the blocking plate in the claw coupling.
Store the equipment in the wooden box.

Catalog excerpts

MATRE MASKIN' E-mail : [email protected] www.matre.no DATA SHEET PRESSURE SWITCH CALIBRATOR M-TRT2

Open the catalog to page 1

MATRE MASKIN' E-mail : [email protected] www.matre.no DATA SHEET PRESSURE SWITCH CALIBRATOR M-TRT2 Technical data Total measure range Accuracy better than Power supply Pressure connection Cero adjustment screw 2m hose with claw coupling to various connection options: • M 10x1 (standard Minimess connection) One wooden box for the complete equipment User manual • To fill the cylinder with oil, turn the spindle (3093) to the outer position. Then remove the • To connect the pressure switch to be calibrated (or its block and bleed valve) there are several options. Either to use standard Minimess connection...

Open the catalog to page 2

M-TRT2-03163

M-TRT2-03163

Catalog excerpts

All Matre Maskin AS catalogs and brochures